1/2 inch S315MC cold forming autobobile steel for boom

For the team, cooperation is the core idea of daily work, and the core of common cooperation is resource sharing. With a perfect resource sharing mechanism, the whole team can be called a unity spirit.A good team lies in the ability to transfer resources,

For the team, cooperation is the core idea of daily work, and the core of common cooperation is resource sharing. With a perfect resource sharing mechanism, the whole team can be called a unity spirit.A good team lies in the ability to transfer resources, knowledge and information in time among team members in order to achieve the common goals of the team. So that we can share experiences and lessons."

Quenching and tempering (QT) is a double heat treatment process of quenching and high temperature tempering. In general, medium carbon steel and medium S315MC cold forming autobobile steel for boom carbon alloy steel often need quenching and tempering treatment. Quenching and tempering can make iron and steel parts obtain a good combination of strength and toughness, with high strength, excellent toughness, plasticity, cutting performance, etc. Some S315MC cold forming autobobile steel for boom alloy steel or low alloy steel must be quenched and tempered to obtain good comprehensive properties. These steels can also be called quenched and tempered steels.

A335 P22 steel pipe belongs to ferrite alloy steel nominal pipe for high temperature use. Chemical composition of A335 P22 steel pipe: C 0.10-0.20, Mn 0.30-0.80, P ≤ 0.025, S ≤ 0.025, Si 0.10-0.50, Mo 0.44-0.65. Mechanical properties of A335 P22 steel pipe: tensile strength 415mpa, yield strength 205 MPa. S315MC cold forming autobobile steel for boom, A335 P22 steel pipe is characterized by good process performance, less sensitivity to the heating temperature of heat treatment, good welding performance, good plasticity, and low strength, especially the high temperature rupture strength is lower than 12Cr1MoV steel. When used at the same temperature and stress, its wall thickness is about 30% thicker than 12Cr1MoV Steel.

The company always adheres to the concept of green production, follows the development path of innovation, transformation and improvement, and has carried out in-depth cooperation with Zhengzhou University and other scientific research institutes, planning from a high starting point, strict standard design, and successfully implementing engineering projects With nearly 20 research and development projects, the company's production technology and equipment are at the forefront of the industry, and indicators such as environmental protection, energy consumption, cost, and resource utilization have reached the advanced level in the industry.