S960MC steel for car safety parts rockwell hardness

S960MC steel for car safety parts, Q460 material is a low-alloy high-strength steel. Q stands for the strength of steel. 460 means that plastic deformation occurs only when the strength of the steel reaches 460MPa. That is, when the external force is rele

S960MC steel for car safety parts, Q460 material is a low-alloy high-strength steel. Q stands for the strength of steel. 460 means that plastic deformation occurs only when the strength of the steel reaches 460MPa. That is, when the external force is released, the steel can only maintain the shape of the force and cannot return to its original shape. This strength is greater than that of ordinary steel. Tensile strength is 550-720MPa, elongation: 17%, Q460 material is made by adding Cr, N, V, Ti and other alloying elements on the basis of 16Mn steel.

S500MC steel plate/sheet,EN10149 S500MC steel plate/sheet, under EN standard, we can regard S500MC steel plate/sheet as high yield strength steels for cold-forming steels. S960MC steel for car safety parts, EN10149 S500MC is mainly used as high yield strength steels for cold-forming steels. The EN10149 S500MC steel is equivalent to SEW092 QStE500TM, NFA E490D, UNI FeE490TM and ASTM X70XLK steel grades.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.