Non-secondary building material S960MC high strength alloy steel in Norway

S960MC high strength alloy steel, Q195 and Q235 belong to carbon structural steel, which are mainly used in buildings and engineering structures such as workshops, bridges, ships, etc. Of course, there are many differences between Q195 steel and Q235 stee

S960MC high strength alloy steel, Q195 and Q235 belong to carbon structural steel, which are mainly used in buildings and engineering structures such as workshops, bridges, ships, etc. Of course, there are many differences between Q195 steel and Q235 steel. 1. Different components. The chemical composition of Q195 steel: C ≤ 0.12, Si ≤ 0.30, Mn ≤ 0.50, P ≤ 0.035, S ≤ 0.040. The chemical composition of Q235 steel: C ≤ 0.22, Si ≤ 0.35, Mn ≤ 1.40, P ≤ 0.045, S ≤ 0.050. 2. The prices of S960MC high strength alloy steel, Q235 steel is higher than that of Q195 steel. 3. The mechanical properties of Q195 and Q235 steel are different. The tensile strength of Q195 steel is ≥390 MPa, yield strength is ≥195 MPa, and the elongation is ≥ 30%. The tensile strength of Q235 steel is 490 MPa, yield strength is ≥235 MPa, and the elongation is 23%.

A537 grade 70 steel with the thickness range is 1.2-600mm, the width range is 1220-4200mm, and the length range is 5000-18000mm. Also note that the S960MC high strength alloy steel, A537 grade 70 steel coil thickness should not exceed 25 mm. The mechanical properties of A537 grade 70 steel is yield strength is 290MPa, and the tensile strength is 485-620Mpa.

Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.