s355mc material group standard plate thickness

Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole w

Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole work procedure run smoothly. For every step, we have special person to be in charge and responsible for our customer and update information to the customer in time. So you just need not worry too much to purchase steel materials from our company.

q345r steel (16MnR) is a low-alloy high-strength steel. It is a special plate for pressure vessels with a yield strength of 340MPa min. Q345R plate has good comprehensive mechanical properties and technological properties. The phosphorus and sulfur contents are slightly lower than the low-alloy high-strength steel plate Q345 steel (16MnR). In addition to the increased tensile strength and elongation requirements compared to Q345B steel, S355MC material group, the impact toughness is also required.

Chemical composition of s355mc material group, Q345D steel plate: C: ≤0.18; Si: ≤0.50; Mn: ≤1.70; P: ≤0.030; S: ≤0.025; Nb: ≤0.07; V: ≤0.15; Ti: ≤0.20; Cr: ≤0.30; Ni: ≤0.50; Cu: ≤0.30; N: ≤0.012; Mo: ≤0.10; Als: ≥0.015. Yield strength (MPa) of Q345D steel plate: ≤16mm: ≥345; 16-40mm: ≥335; 40-63mm: ≥325; 63-80mm: ≥315; 80-100mm: ≥305; 100-150mm: ≥285; 150-200mm: ≥275; 200-250: ≥275; 250-400: ≥265. Tensile strength of Q345D low alloy steel: 450-630(MPa). Elongation: ≥21. Impact test: -20 ℃: ≥34.

Both the cross rolling method and the extrusion method must first heat the tube blank or ingot, and the steel tube produced is called hot rolling tube. Steel pipes produced by hot working can sometimes be cold worked as required. There are two methods of cold working: one is cold drawing, that is, drawing the s355mc material group steel pipe through the drawing die to make the steel pipe gradually thin and elongate; the other is cold rolling, which is the method of applying the hot rolling mill invented by the menesmann brothers to cold working. The cold working of s355mc material group seamless steel pipe can improve the size accuracy and finish of steel pipe, and improve the mechanical properties of materials.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.

The company operates on the principles of fairness, objectivity, science, pragmatism and integrity. The management treats people with courtesy, takes sincerity as the standard management, dares to open up, unites and advances, carries on the past and makes unremitting efforts, seizes the good trend of economic development, strengthens exchanges with peers, makes friends with all walks of life, keeps pace with the times and creates greater brilliance of the enterprise, and makes its own contribution to the prosperity and development of the steel industry.