strenx steel for auto frame stock keeper and supplier

After quenching and tempering, the 40Cr alloy steel plate has good comprehensive mechanical properties, good low-temperature impact toughness and low notch sensitivity. The hardenability of steel is good. It can be hardened to Ф28～60mm in water quenching

After quenching and tempering, the 40Cr alloy steel plate has good comprehensive mechanical properties, good low-temperature impact toughness and low notch sensitivity. The hardenability of steel is good. It can be hardened to Ф28～60mm in water quenching and Ф15～40mm in oil quenching. In addition to quenching and tempering, 40cr sheet is also suitable for cyanidation and high-frequency quenching.

Manganese steel plate is a kind of common steel, which is a kind of high-strength anti manganese steel. strenx steel for auto frame, Manganese steel plate is mainly used to bear the impact, extrusion, material wear and other severe working conditions. It is a typical anti-wear steel, with austenite and carbide as cast structure. After water quenching at about 1000 ° C, the structure changes into single austenite or austenite with a small amount of carbide.

Cold rolled strenx steel for auto frame steel sheet can be produced by two high mill, four high reversing mill, multi high reversing mill and tandem cold mill. Although there are still only two work rolls in four high and multi high rolling mills, each work roll is supported by one or more large diameter backup rolls, which can prevent deflection of work roll. As a result, wide and thinner strenx steel for auto frame steel plates can be produced. For example, 20 high mill can produce as thin as 0. 001 mm sheet, but the two high mill can only produce as thin as 0. 35mm sheet

The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.