S 550 MC cutting into large diameter coil strip
Seamless steel pipe refers to the steel pipe made of a whole piece of metal without joints on the surface. According to the production method, it can be divided into hot rolling tube, cold rolling tube, cold drawing tube, S 550 MC, extrusion tube and spin
Seamless steel pipe refers to the steel pipe made of a whole piece of metal without joints on the surface. According to the production method, it can be divided into hot rolling tube, cold rolling tube, cold drawing tube, S 550 MC, extrusion tube and spinning tube. According to the shape of the section, it can be divided into two types: circular and irregular. The seamless tube has a maximum diameter of 650 mm (expanding tube) and a minimum diameter of 0.3 mm (capillary tube), which can be divided into thick walled tube and thin walled tube according to the thickness.
In recent years, in line with the development trend of iron and S 550 MC steel industry at home and abroad, we have accelerated the transformation of development mode, promoted structural adjustment, and formed a rich product series of medium and thick plates, hot rolled steel coils, profiles, steel pipes, etc., which S 550 MC are widely used in automobiles, long-span bridges, railways, machinery, ocean and so on fields. Meanwhile, we also provide deep processing for the steel materials.
X-rays or γ-rays are projected on the surface of the steel plate, and rubber can be placed on the other side of the steel plate. Since the radiation propagates through the steel plate and is absorbed, the intensity is different due to the presence or absence of defects, so the film can record the shape and position of the defects. This S 550 MC method is sensitive to the detection of common steel plate defects such as slag inclusions, porosity and pores. The disadvantage is that it is difficult to find the specific depth of the defect and it is not easy to find cracks.
Large-thickness S 550 MC, Z35 grade steel plate is a kind of extra-thick steel plate that is applied under specific environmental conditions, such as the key parts such as the turbine seat ring and guide vane of the generator set. It has high requirements for safety, reliability, and long service life. Develop 200mm-300mm thick steel plate of Z35 level, to ensure that the layer tear resistance reaches Z35 level. 300mm thick Z35 grade steel plate can be used not only in the hydropower industry, but also in the manufacture of other large key equipment, and has broad prospects.
With a high-quality and complete after-sales service system, the company solves the user's hindrance and improves the reliability of steel S 550 MC product quality. Reaching every corner of the globe with professional services, users anywhere can get thoughtful and detailed services form us is our pursue. We promise all our steel materials are manufactured and tested in accordance with responding standards. We will take full responsibility for the quality of the steel materials we provide.
Leave a message