Prime EN10149-2 automotive steel coil S700MC corrugated steel roofing sheet

In the first ten days of February 2020, the key statistics show that steel enterprises produce a total of 19.3943 million tons of crude steel, 17.9747 million tons of pig iron, 17.5904 million tons of steel and 3.225 million tons of coke. This ten day ave

In the first ten days of February 2020, the key statistics show that steel enterprises produce a total of 19.3943 million tons of crude steel, 17.9747 million tons of pig iron, 17.5904 million tons of steel and 3.225 million tons of coke. This ten day average daily output of EN10149-2 automotive steel coil S700MC crude steel is 1939400 tons, down 2.68% on a month on month basis, up 3.16% on a year-on-year basis; steel is 1759000 tons, down 9.09% on a month on month basis, up 2.51% on a year-on-year basis.

Our company's business departments are a group of excellent and hard-working employees, who constantly carry out knowledge updating and steel knowledge training every day, only to provide better and professional services to customers.

The difference between alloy steel plate and carbon steel has the following points. First, the hardenability of carbon steel is low, and the maximum diameter of water quenching of carbon steel is only 10 mm to 20 mm; second, the strength of carbon steel is only 235 MPa, while that of alloy steel is more than 360 MPa. Third, carbon steel has poor tempering stability. In order to ensure high strength, low tempering is used for carbon steel during quenching and tempering treatment, so the toughness of the carbon steel is insufficient. Fourth, the corrosion resistance, low heat resistance, and wear resistance of carbon steel cannot be compared with alloy steel, EN10149-2 automotive steel coil S700MC.

The chemical composition of Q345D seamless steel pipe is as follows: C ≤ 0.18, Si ≤ 0.50, Mn ≤ 1.70, P ≤ 0.030, S≤ 0.025, Nb ≤ 0.07, V ≤ 0.15, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.50, Cu ≤ 0.30, N ≤ 0.012, Mo ≤ 0.10, Al ≥ 0.015. EN10149-2 automotive steel coil S700MC, Q345D seamless steel pipe has good comprehensive mechanical properties, low temperature impact toughness, corrosion resistance, cold stamping, machinability and weldability. Q345D seamless steel pipe is widely used in welding structures, such as bridges, vehicles, ships, pipelines, boilers, large vessels, etc..

Square hollow section S355J2H to Turkey. In January of 2015, our customer from Turkey chose us as their supplier of seamless RHS EN10219 S355J2H with a trail order of 120 tons. They required DNV test for the MTC and each tube. DNV inspector tested all the tubes and MTC. When our customer received the reports, they gave us a second order of 852.5 tons. Since then we maintain a long time cooperation relationship.

The company adheres to the business philosophy of "good quality, customer first, honesty and trustworthiness", and strives to provide customers with high-quality EN10149-2 automotive steel coil S700MC products and excellent services. Our company's products EN10149-2 automotive steel coil S700MC are widely used in petroleum, chemical, power station, boiler and other industries, mainly used in reactors, heat exchangers, separators, spherical tanks, oil and gas tanks, liquefied gas tanks, nuclear energy reactor pressure shells and other equipment.