Manufacturer S960MC auto steel flat lift gate steel
Alloy structural steel specification Steel: 15CrMo, S960MC auto steel flatDigital Code: A30152Steel Group Series: CrMoImplementation of the standards: GB / T3077-201515CrMo steel chemical composition Carbon C: 0.12 ~ 0.18Si Si: 0.17 ~ 0.37Chromium Cr: 0.8
Alloy structural steel specification Steel: 15CrMo, S960MC auto steel flatDigital Code: A30152Steel Group Series: CrMoImplementation of the standards: GB / T3077-201515CrMo steel chemical composition Carbon C: 0.12 ~ 0.18Si Si: 0.17 ~ 0.37Chromium Cr: 0.80 ~ 1.10Ni Ni: ≤0.030Copper Cu: ≤0.030Mo Mo: 0.40 ~ 0.55Manganese Mn: 0.40 ~ 0.70Sulfur S: ≤0.035Phosphorus P: ≤0.035
The company adheres to the management concept of "people-oriented, talent is concerned", develops business with the spirit of "believing strength, practical style, S960MC auto steel flat professional service and dare to compete", and provides customers with "professional, value-added and effective" service support. For the company's development and take-off, we work together to move forward and create a better S960MC auto steel flat tomorrow!
Expression method of pressure coefficient of seamless steel pipe: pressure P < 7MPa coefficient S-8 7 < S960MC auto steel flat steel pipe pressure P < 17.5, coefficient 5-6 pressure P > 17.5, coefficient S-4 seamless pipe production and manufacturing: tube blank -- Inspection -- peeling -- Inspection -- Heating -- perforation -- pickling -- grinding -- lubrication and air drying -- welding head -- cold drawing -- solution treatment -- pickling -- pickling and passivation -- Inspection -- cold rolling -- degreasing -- air drying -- internal polishing -- one external polishing -- Inspection -- identification of finished S960MC auto steel flat product packaging.
Temperature has a great influence on the strength of the material, S960MC auto steel flat. When the temperature exceeds a certain value, the strength limit of the steel will be reduced. The higher the temperature, the lower the strength. In addition, the longer the steel is used at high temperature, the lower the strength. Therefore, if the steel works at high temperature for a long time, the instantaneous strength of the steel can not be used as its performance index, nor can the room temperature performance replace the high temperature performance.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
Leave a message