Export din en 10149-2 to Zambia

ASME SA203 is a low-nickel alloy steel, including five grades of A, B, D, E, and F. SA203 Gr.E steel plate impact temperature -101 ° C. SA203 Gr.D / E / F has good impact toughness and mechanical properties under low temperature working conditions

ASME SA203 is a low-nickel alloy steel, including five grades of A, B, D, E, and F. SA203 Gr.E steel plate impact temperature -101 ° C. SA203 Gr.D / E / F has good impact toughness and mechanical properties under low temperature working conditions, and is usually used in low temperature environments of -70 ～ -101 ℃ (the tempered state can be -107 ℃). din EN 10149-2 Smelting method: It is smelted by electric furnace + refining outside the furnace + vacuum degassing, and should be fine grain killed steel.

Q245R boiler steel plate introduction: Q is the first letter of "Qu" Chinese Pinyin; Number 245 is the yield strength value; R: is the first character of "Rong" Chinese Pinyin. Q245R steel is a special plate for pressure vessels and boilers with a yield strength of 245MPa. It has outstanding mechanical properties and processability. If you have special requirements, our company can supply Z15, Z25, Z35 and other Z performance tests.

S355J2 steel plate din en 10149-2 rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the rolling speed is 1.6-2.0m/s, the din en 10149-2 single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.

The consistent tenet of honest management! Know the needs of customers, for the needs of customers, urgent customers think! Our quality is better for the din en 10149-2 same products, our price is lower for the same quality, and our service is better for the same price. welcome to purchase steel materials from our company. we have the professional team and good after-sale system to customers. our company din en 10149-2 is your best choose.

From the order to the delivery, there are three quality inspections to ensure that the qualified rate of finished products is more than 100%. We promise that every order will be tracked in a timely manner to ensure that customers can receive goods safely and constantly listen to their opinions and suggestions, reflect on our own problems, and let customers feel at ease. We have a large warehouse in Shanghai and Tianjin, which can provide customers with sufficient sources of supply.