50mm thickness S 500 MC high yield strength alloy steel with high quality

Q370qDNH steel plate atmospheric corrosion resistance steel grade: Q—The first letter of the Chinese pinyin of "qu" for the yield strength of steel used in bridges; 370-a specified value of small yield strength, unit MPa; q-the first lette

Q370qDNH steel plate atmospheric corrosion resistance steel grade: Q—The first letter of the Chinese pinyin of "qu" for the yield strength of steel used in bridges; 370-a specified value of small yield strength, unit MPa; q-the first letter of the Chinese pinyin of the word "bridge" for bridge steel; D—The quality level is D level; N——The first letter of the Chinese phonetic alphabet of the word "Nei"; H——The first letter of Pinyin of "hou"; Q370qDNH steel standard: GB/T 714-2015.

S 500 MC high yield strength alloy steel, Wear-resistant steel plates are easy to overheat, so pay attention to heating temperature and holding time. It is recommended to heat up to 820 degrees for proper insulation. Tempering temperature: 320 degrees, sufficient time. Hardness: 45-48HRC. Good performance. Salt bath NaCl:BaCl=3:7 can be heated at a temperature of 820, time is 30 seconds/mm (mm refers to the effective thickness of the part), oil cooling. Tempering temperature is 280, air furnace time is 2 hours, and nitrate furnace time is 30 minutes.

Titanium microalloying is an element of S 500 MC high yield strength alloy steel strengthening complex with carbon and nitrogen. The addition of micro amount of titanium in the steel can fix almost all nitrogen and part carbon in the steel, so as to eliminate the strain aging phenomenon and improve the aging impact performance of the steel. At the same time, it can refine the grains and change the morphology of the compounds. According to the atomic weight ratio of Ti and N in S 500 MC high yield strength alloy steel tin formula (Ti = 3.4n), the content of Ti in steel should be controlled between 0.015 and 0.025%. Generally, the amount of ferrotitanium added to each ton of steel is 1kg.

To provide customers with the most satisfactory service and realize the win-win of economic and social benefits, our company promises to provide excellent S 500 MC high yield strength alloy steel products in this bidding, and in line with the attitude of being serious and responsible to customers, before sending goods to users, the S 500 MC high yield strength alloy steel technical personnel shall confirm that there is no fault in the equipment before sending goods to users, and then send goods and products to users, and formulate the following service terms.