What is the plate ZQS700L automotive steel sheet beveling

As an experienced world class steel materials supplier and exporter, logistics and fast delivery is a crucial step to us. Our logistics department and shipping department take the responsiblity to allocate and transport steel materials from our mill and w

As an experienced world class steel materials supplier and exporter, logistics and fast delivery is a crucial step to us. Our logistics department and shipping department take the responsiblity to allocate and transport steel materials from our mill and warehouse to customer port or designated destination. The cooperation of the two departemts are excellent and that powerfully support our fast delivery, and strive for shorter time for customers to receive steel materials.

ZQS700L automotive steel sheet, Q345B low alloy steel has outstanding characteristics, such as:
First, Q345B low alloy steel has good toughness. It is easy to bend and stretch, not easy to break, and can be used for multiple processing. Second, ZQS700L automotive steel sheet, Q345B low alloy steel is easy to weld and can be used for assembly. Third, Q345B low alloy steel has good strength, good compression resistance and long service life. Fourth, the weather resistance of Q345B low alloy steel is good, and the use is not affected whether it is winter or summer.

Chemical elements of 42SiMn steel: C: 0.39-0.45, Si: 1.10-1.40, Mn: 1.10-1.40. Mechanical properties of 42SiMn steel: tensile strength 885 MPa; yield strength 735 MPa; elongation after fracture: 15; reduction of area: 40; impact energy: 47J. 42SiMn steel belongs to alloy quenched and tempered steel with good properties, high strength, wear resistance and hardenability. Under certain conditions, the strength, wear resistance and hot working performance of 42SiMn steel are better than 40Cr steel, ZQS700L automotive steel sheet, and can be used instead of 40CrNi steel.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.