How is S315MC steel for cold forming parts created?

The company has a group of mature steel plate production and processing line construction and production management experience. In addition, the company has professional and technical personnel. BBN steel is a modern enterprise integrating scientific rese

The company has a group of mature steel plate production and processing line construction and production management experience. In addition, the company has professional and technical personnel. BBN steel is a modern enterprise integrating scientific research and development, production processing, sales and service. The company now has finance department, production department, sales team, technical department, quality control department, logistics department and after-sales service team. At the same time, it also adheres to international standards and adheres to the international line.

In the manufacturing process of boiler pressure components, raw materials must undergo complex processing deformation and welding, so the steel used to manufacture the boiler must also have good process performance. All materials S315MC steel for cold forming parts used to manufacture pressure parts must conform to the relevant national standards for boiler steel. The defects such as delamination, non-metallic inclusion, porosity and looseness in the steel shall be as few as possible, and white spots and cracks are not allowed.

S355J2G3 is low alloy high strength structural steel, and it is roughly equivalent to GB Q345D.S355J2G3 is a European standard steel with composition of C ≤ 0.20, Si ≤ 0.55, Mn ≤ 1.60, P ≤ 0.035, S ≤ 0.035. The meaning of J2G3 indicates that the delivery state of S355J2G3 steel is normalized, the impact energy at - 20 ℃ is 27J. G3 and G4 indicate the deoxidization mode. S315MC steel for cold forming parts, S355J2G3 steel is semi killed steel, S355J2G4 steel is fully killed steel.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.