ZQS700L automobile structure steel plate The company strictly controls product quality

, Q345 angle steel has two kinds: unequal angle steel (two sides are not the same size) and equal angle steel (two sides are the same size). , Q345 angle steel is widely used for mechanical processing, building structure, steel structure, etc.. In additio

, Q345 angle steel has two kinds: unequal angle steel (two sides are not the same size) and equal angle steel (two sides are the same size). , Q345 angle steel is widely used for mechanical processing, building structure, steel structure, etc.. In addition, Q345 angle steel can withstand - 40℃ low temperature at least and can be used in cold areas. The weight calculation formula of Q345 angle steel: 0.00785 * (side width + side width - side thickness) * side thickness, the value obtained is the weight per meter, and then multiplied by the length to calculate the weight of a piece.

asme sa514 grade K alloy steel element composition%
C: 0.10-0.20, Si: 0.15-0.30, Mn: 1.10-1.50, P max.: 0.035, S max.: 0.035, Mo: 0.45-0.6.0, B: 0.001-0.005
The mechanical properties in thickness (mm)T≤65
Yield strength (≥Mpa): 690
Tensile strength (Mpa):760-895
Elongation in ≥,%: 18

We have a professional after-sales service team, the company has developed a clear service process and service standards, after-sales service team members strictly perform after-sales procedures, comply with service standards. The most important thing is that we have set up the correct concept of after-sales service, "customer first, sincere service for users".

ZQS700L automobile structure steel plate,Our 12Cr2Mo1VR steel plate breaks through the specification limit, with a thickness of up to 180 mm and a single weight of 43.7 tons. The flaw detection can meet the highest level of NB / T47013 flaw detection level. Its thickness and unit weight exceed the production limit of vanadium steel. The 12Cr2Mo1VR steel plate with such specifications has high technical requirements, severe performance requirements, and great production difficulties. In the production process, it is easy to appear the tail area defects, which will cause the steel plate to fail inspection. So please choose your suppliers carefully.