South Korea s 700 mc steel sheet top supplier

Q550D Application: This steel is mainly used in steam turbines for main steam pipes with steam parameters up to 540℃, turning guide vane ring, steam turbine baffle, baffle outer ring, and various superheater tubes, ducts and pipes with tube wall temperatu

Q550D Application: This steel is mainly used in steam turbines for main steam pipes with steam parameters up to 540℃, turning guide vane ring, steam turbine baffle, baffle outer ring, and various superheater tubes, ducts and pipes with tube wall temperature ≤570℃ The corresponding forgings.

S 700 mc steel sheet,SA514 grade S high strength steel alloy element composition%
C: 0.11-0.21, Si: 0.15-0.45, Mn: 1.10-1.50, P max.: 0.035, S max.: 0.035, B max.: 0.005, Mo: 0.10-0.60, V max.: 0.06.
The mechanical properties in thickness (mm) T≤65
Yield strength (≥Mpa): 690
Tensile strength (Mpa):760-895
Elongation in ≥,%: 18

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.

In 2019, the output of pig iron in the world was 1.265 billion tons, with China accounting for 64%; the overseas output accounted for 36% (460 million tons), ranking 86.982 million tons of EU 28 countries, 74.907 million tons of Japan, 74.099 million tons of India, 73.264 million tons of CIS, and 47.521 million tons of South Korea. In the first quarter, the global output was 311 million tons, with a year-on-year decrease of 0.5%, with China increasing by 2.4%; the overseas output decreased by 5.4%, Among them, EU decreased by 9.2%, Japan increased by 1.3%, India decreased by 7.7%, CIS increased by 2.1%, and South Korea decreased by 4%.