S900MC mechanical properties top manufacturer in Spain
Cold-rolled strips are widely used, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, food cans. Cold rolled steel sheet is the abbreviation of ordinary carbon structural steel cold rolled plate, , also
Cold-rolled strips are widely used, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, food cans. Cold rolled steel sheet is the abbreviation of ordinary carbon structural steel cold rolled plate, , also called cold rolled plate. The cold-rolled plate is a hot-rolled strip of ordinary carbon structural steel, which is further cold-rolled into a steel plate with a thickness of less than 4mm.
S900MC mechanical properties,Q420C steel belongs to low alloy high strength steel. Q420 is named as the steel with yield strength of 420MPa, C means the impact temperature is 0 ℃, and Q is the abbreviation of yield strength. Chemical composition of Q420C steel: C ≤ 0.20, Si ≤ 0.50, Mn ≤ 1.70, P ≤ 0.035, S ≤ 0.035, Nb ≤ 0.07, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.80, Cu ≤ 0.30, N ≤ 0.015, Mo ≤ 0.20. The mechanical properties of Q420C steel are: yield strength ≥ 340 Mpa, tensile strength 500-680 Mpa, elongation after fracture ≥ 18%, impact energy 34J. , Q420C steel has good mechanical properties and weldability, good cold and hot workability.
Responsibilities: dealing with quality feedback and complaints from Customer.Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office.
Our 1810mm production line successfully rolled 1.2mm × 1250mm ultra-thin specifications high strength automotive steel, and the product quality and performance fully met the standards. In recent years, customers have become increasingly demanding for lightweight vehicles. Our company aims at the market and focuses on the development of thin-gauge high strength automotive steel. The research and development personnel adjusted the product composition based on theoretical calculations and drawing on other experiences to meet customers' higher requirements for automotive steel yield strength and tensile strength.
Leave a message