S700MC hot rolled steel for car gear stock vs A283 steel

41Cr4 (1.7035) material is an alloy structural steel grade commonly used internationally. Its tensile strength, yield strength and hardenability are all higher than that of 40# steel, but it also has certain defects that its weldability is limited and the

41Cr4 (1.7035) material is an alloy structural steel grade commonly used internationally. Its tensile strength, yield strength and hardenability are all higher than that of 40# steel, but it also has certain defects that its weldability is limited and there is a tendency to form cracks. 41Cr4 steel is generally used for more important quenched and tempered parts, such as parts that work under alternating loads, medium speed and medium load parts.

"A204 Grade C steel chemical composition(%)Carbon max.: 0.28 Manganese max.: 0.90Phosphorus Max.: 0.025Sulfur Max.: 0.025Silicon: 0.15-0.40Molybdenum: 0.45–0.60S700MC hot rolled steel for car gear, A204 Grade C steel mechanical propertiesFor boiler steel plate A204 Grade C, the yield strength shall be above 295 Mpa, tensile strength from 515 Mpa to 655 Mpa."

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.