S460JR steel Vs S900MC mechanical properties

By Region: data shows that in the first quarter of Asia, crude steel S900MC mechanical properties production was 315.2 million tons, down 0.3% year on year. Crude steel production in the EU region in the first quarter was 38.3 million tons, down 10.0% yea

By Region: data shows that in the first quarter of Asia, crude steel S900MC mechanical properties production was 315.2 million tons, down 0.3% year on year. Crude steel production in the EU region in the first quarter was 38.3 million tons, down 10.0% year on year. The output of crude steel in North America in the first quarter was 29.5 million tons, down 4.0% year on year. According to the output ranking, according to the latest data of the S900MC mechanical properties world iron and Steel Association, the output of crude steel in the top ten countries in March 2020 was 126 million tons (85.71% of the world), and the output of crude steel in the first quarter was 376 million tons (85.07% of the world).

As the tungsten content increases, the strength and toughness of the NM360 wear-resistant steel plate increase. When the mass fraction of tungsten exceeds 1.06%, the toughness decreases due to the increase in the amount of carbide precipitation. This is because tungsten combines with carbon atoms in the NM360 wear-resistant plate to form a short-range ordered C-w atom pair bond structure. The C-w atomic bond is stronger than the C-Mn and C-Fe atomic bonds. Therefore, after adding tungsten to the NM360 wear-resistant steel plate, cracks will be formed, and the energy required to break the atomic bond will be greatly increased. The toughness and strength of S900MC mechanical properties, NM360 wear-resistant steel plate treated with water toughening treatment will also be significantly improved.

Chemical elements of 42SiMn steel: C: 0.39-0.45, Si: 1.10-1.40, Mn: 1.10-1.40. Mechanical properties of 42SiMn steel: tensile strength 885 MPa; yield strength 735 MPa; elongation after fracture: 15; reduction of area: 40; impact energy: 47J. 42SiMn steel belongs to alloy quenched and tempered steel with good properties, high strength, wear resistance and hardenability. Under certain conditions, the strength, wear resistance and hot working performance of 42SiMn steel are better than 40Cr steel, S900MC mechanical properties, and can be used instead of 40CrNi steel.

Insist on the spirit of development and indomitable entrepreneurship; the spirit of leading science and technology and striving for first-class affairs; the spirit of strict management and market development; the spirit of taking the lead in setting an example and selfless dedication; and the spirit of people-oriented and enterprise ownership.