S420MC steel for car body hot rolled plate price per lb

Our quality control department will do inspection for details of the steel materials S420MC steel for car body before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for

Our quality control department will do inspection for details of the steel materials S420MC steel for car body before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for them to check. Meanwhile, we will publish inspection report and send them the PDF version. Besides, we accept any third party inspection such as SGS, BV, etc. And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier.

The corrosion resistance of stainless steel depends on the alloy elements contained in the steel. The chemical composition of S420MC steel for car body, stainless steel and acid resistant steel is different. The former is not necessarily resistant to chemical medium corrosion, while the latter is generally stainless. The better stainless steel also contains nickel. Adding molybdenum can further improve the atmospheric corrosion resistance of stainless steel, especially the corrosion resistance of chloride containing atmosphere.

A537 grade 70 steel with the thickness range is 1.2-600mm, the width range is 1220-4200mm, and the length range is 5000-18000mm. Also note that the S420MC steel for car body, A537 grade 70 steel coil thickness should not exceed 25 mm. The mechanical properties of A537 grade 70 steel is yield strength is 290MPa, and the tensile strength is 485-620Mpa.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the S420MC steel for car body rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of S420MC steel for car body steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

Our quality and service commitment: S420MC steel for car body product quality problems, life-long replacement.In the process of using, any time if you find we supplied steel materials not conform to the requirements of technical standards, we can replace it for you free of charge. However, it should be noted that non product quality problems caused by improper use are not covered by the warranty. Please pay attention to the service time commitment as well as the product quality assurance commitment. Because only the products of big brands and reliable enterprises with complete after-sales service system can truly realize the long-term product quality assurance and the whole process of service.

The formula of enterprise success is: success = strategy × organizational capability, that is, having the right direction and strong organizational capability. The core competence of an enterprise depends on three pillars: first, talents (talent echelon); second, core values of enterprise culture; third, organizational governance model. If the enterprise is a tree, then the core values of talents, corporate culture and organizational governance mode are just like the root of the tree. With them, the enterprise will flourish and grow forever.