s420mc en 10149-2 galvanealed coil online quotation

According to the data released by the world iron and Steel Association, the world pig iron production in March 2020 was 103 million tons, a year-on-year decrease of 3.5%, a year-on-year increase of 1.8% in February, and the overseas pig iron s420mc en 101

According to the data released by the world iron and Steel Association, the world pig iron production in March 2020 was 103 million tons, a year-on-year decrease of 3.5%, a year-on-year increase of 1.8% in February, and the overseas pig iron S420MC EN 10149-2 galvanealed coil production excluding China was 36.309 million tons, a year-on-year decrease of 11%. In March, except for China and Russia, pig iron production increased by 1%6, other countries' pig iron s420mc en 10149-2 galvanealed coil production decreased year-on-year, with 28 EU countries reducing by 14.2%, 3 CIS countries (Russia, Ukraine and Kazakhstan) reducing by 0.8%, India reducing by 14.6%, Japan reducing by 7.9% and South Korea reducing by 9.5%.

s420mc en 10149-2 galvanealed coil, Hardened wear-resistant plates are gradually annealed at a temperature higher than 250℃ to lose their hardness, which greatly reduces the wear resistance. The welding process will also reduce the hardness near the weld; the wear layer of the bimetal wear plate is of high alloy composition, and there is a secondary hardening effect at a certain temperature, and it can generally work below 650℃.

As per JIS G3101 standard, the Carbon (C), Silicon (Si) and Manganese (Mn) content of SS400 steel plate are not controlled. Phosphorus (P) content of s420mc en 10149-2 galvanealed coil, JIS SS400 steel plate is 0.050% Max and Sulphur (S) content is 0.050% Max. The SS400 steel melting point is 1430 Degree Celsius, Brinell Hardness is 160HB, density is 7.85g/cm3, Young’s Modulus is 190-210Gpa. The strength and elongation of JIS SS400 steel plate varies with thickness. Generally, the tensile strength of SS400 steel plate is 400-510 Mpa. Elongation is above 21%. Yield strength ≥245Mpa for thickness≤16mm. When the JIS SS400 steel plate is thciker than 100mm, the yield strength shall not less than 205Mpa.

Customer concept: customer first. Guided by market changes and guided by customer needs, we design the optimal product solutions and provide the best after-sales service. Partners: to reach a balance of interests with all stakeholders, to build a harmonious coexistence and win-win cooperation.