s355ms hot rolled automotive steel chemical elements

The company was established in 2000, covering an area of more than 4,500 acres. It has fixed assets of 200 million yuan, and employs more than 1,200 people. It has now formed coking, sintering, white ash, pellets, ironmaking, s355ms hot rolled automotive

The company was established in 2000, covering an area of more than 4,500 acres. It has fixed assets of 200 million yuan, and employs more than 1,200 people. It has now formed coking, sintering, white ash, pellets, ironmaking, s355ms hot rolled automotive steel steelmaking, steel rolling, oxygen production, gas and waste heat The complete circular economy industrial chain including power generation, comprehensive utilization of slag, soot and dust treatment, sewage treatment and recycling, etc. It mainly produces hot-rolled steel plates and s355ms hot rolled automotive steel carbon structural steels, high-quality carbon structural steels, low-alloy high-strength steels, medium and wide-band steels for cold-rolled stamping, and hot-rolled coils.

The company has our own truck fleet, and can transfer products flexibly and quickly. At the same time, we have large warehouses near the ports of Tianjin and Shanghai, so as to ensure that we can deliver high-quality products to customers in the first time. At the same time, it also greatly reduces the transportation cost, and realizes the double harvest of time benefit and economic benefit. Time guarantee is one of the important strengths of our service.

TMCP process is an important means to improve the comprehensive properties of steel. It can be used to produce ship plate, vessel plate, boiler plate, bridge steel, etc. Compared with the normalized steel of the same strength grade, TMCP can reduce the alloy content of the s355ms hot rolled automotive steel steel, reduce the carbon equivalent and improve the welding performance. TMCP is more and more widely used in various types of steel rolling industry.

In November of 2015, Thailand one company contacted with us from Internet. They are find the trustable supplier of S355J2H seamless pipe s355ms hot rolled automotive steel for there cable car supporter. Due to the special using of the pipes, they are very careful and servious when choosing the supplier. After one months contact and discussion by email, they come to our company. We drive to the pipe mill for visit of 2 days. Through this visit, they are very confident with our production ability and proucts quality. Finally, they accept the grade we suggest Q345D. After back to office, they put the order of 1400 tons pipe to us directly.

Mechanical Properties A242 steel:
ASTM A242 specification is made for low alloy steel with high strength, it has good atmospheric corrosion resistance, some applications has shown that it has better corrosion resistance than ASTM A36 steel and ASTM A572 Grade 50.
Tensile: 70 ksi min (3/4 and under), 67 ksi min (3/4-1.5) 63 ksi min (over 1.5-4)
Yield: 50 ksi min (3/4 and under), 46 ksi min (3/4-1.5) 42 ksi min (over 1.5-4)
Elongation: 16% min in 8” 19% min in 2” (for plates wider than 24”)

With the development of China's market economy, the company vigorously implements the strategy of industrialization, internationalization and diversification, promotes the group operation, intensive development and lean management, and through a rich series of products and project portfolio as well as a complete operation network, Build the company into a modern enterprise with scientific development concept, continuous innovation vitality, excellent corporate culture, strong sense of social responsibility and international first-class competitiveness.