Plate stock s420 steel mechanical properties 1000tons in Dubai

With the development of remote oil and gas fields, polar oil and gas fields, offshore oil and gas fields and acid oil and gas fields, oil and gas pipeline engineering is facing challenges of high-pressure transmission and harsh environment such as low tem

With the development of remote oil and gas fields, polar oil and gas fields, offshore oil and gas fields and acid oil and gas fields, oil and gas pipeline engineering is facing challenges of high-pressure transmission and harsh environment such as low temperature, large displacement, deep sea and acid medium. In order to ensure the enthusiasm and safety of pipeline construction and operation, the basic requirements and development trend of , pipeline steel are high strength, high toughness, large deformation, thick wall, high corrosion and good weldability.

A36 plates technical parameters, A36 ms steel sheets datasheet: A36 steel consists of carbon 0.25% max., phosphorus 0.040% max., sulphuric 0.050% max., silicon 0.40% max. and copper 0.20% max. Mechanical properties of A36 steel include yield strength 250Mpa min., tensile strength 400-500Mpa and elongation 20% min. Brinell hardness 119-162 HBW, based on the conversion from tensile strength. Modulus of elasticity (Young’s modulus): 200 GPa (29×103 ksi). Shear modulus: 79.3 GPa (11.5×103 ksi). The density of , A36 plates is 7.85g/cm3.

After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.

Pakistan's iron and steel industry has suspended production and operation since the outbreak, the dawn reported on April 8. Last month, Prime Minister Imran announced a rescue package for the steel industry. Recently, Pakistan's steel industry called for the resumption of production as soon as possible. The Secretary General of the association of large steel producers in Pakistan said that steel is the pillar of Pakistan's construction industry, and Pakistan's economy cannot bear the consequences of the long-term closure of the steel industry. Any delay in the resumption of production will lead to the failure of the government's plan to revitalize the construction industry, which will have a negative impact on Pakistan's economy. It is hoped that the government will immediately resume s420 steel mechanical properties production in the steel industry, especially those that are able to provide shelter for workers.