We are Ready For any places moving!

Export and import steel for truck chassis assemblies low alloy steel

Export and import steel for truck chassis assemblies low alloy steel

The automobile structure steel for truck chassis assemblies steel coil is one of our featured products. The main standards for automobile structure steel coil are JIS G3113, EN 10149-2, Q-BQB 310-2009, SEW092, DIN 17102, etc. The automobile structure stee

Export and import steel for truck chassis assemblies low alloy steel

The automobile structure steel for truck chassis assemblies steel coil is one of our featured products. The main standards for automobile structure steel coil are JIS G3113, EN 10149-2, Q-BQB 310-2009, SEW092, DIN 17102, etc. The automobile structure steel coil is always pickled. For the steel coil, our processing center provide slitting, cutting etc. services. Our main automobile structure steel grades are SAPH440, S355MC, S500MC, S700MC, QStE380TM, QStE500TM, steel for truck chassis assemblies etc.

Asme sa514gr.A high strength steel coil element composition%
C: 0.15-0.21, Si: 0.40-0.80, Mn: 0.80-1.10, P max.: 0.035, S max.: 0.035, B max.: 0.0025, Cr: 0.50-0.80, Mo: 0.18-0.28, Zr: 0.05-0.15
The mechanical properties in thickness (mm)T≤65
Yield strength (≥Mpa): 690
Tensile strength (Mpa):760-895
Elongation in ≥,%: 18

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.

Leave a message

Your email address will not be published. Required fields are marked *