EN10149-2 S700MC hot rolled steel, vessel plate mill

For the estimation in April and the second quarter, the estimation on March 16 is still valid, but the decrease in April is 10% higher than the neutral prediction. It is a conservative estimation based on 10% for the high probability event. In the second

For the estimation in April and the second quarter, the estimation on March 16 is still valid, but the decrease in April is 10% higher than the neutral prediction. It is a conservative estimation based on 10% for the high probability event. In the second quarter, the output of overseas pig iron will be reduced by 11.67 million tons, affecting the demand for EN10149-2 S700MC hot rolled steel iron ore of about 1.84 million tons; in the first half of the year, the output will be reduced by 18.899 million tons, affecting the demand for iron ore of 32.13 million tons.

Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as EN10149-2 S700MC hot rolled steel, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.

20# seamless steel pipe chemical composition: C: 0.07-0.23, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.25, Ni: 0.30, Cu: 0.25. 20# seamless steel pipe mechanical properties: recommended heat treatment temperature: 910℃, tensile strength: 410 MPa, yield strength: 245 MPa, elongation: 25%, impact energy is not required. 20# seamless steel pipe hardness is higher than 10# seamless steel pipe. EN10149-2 S700MC hot rolled steel, 20# seamless steel pipe has good weldability, no temper brittleness, and its machinability can be improved by water quenching. 20# seamless steel pipe can be used to make welded components, as well as parts with small load after forging, hot stamping and cutting.

Product concept: take the technology leading as the pillar of the enterprise, achieve the development goal of the enterprise with the reliable products, the reliable technology and the trustworthy services, and devote to the creative reform activities leading in the technical development and career of the industry to create new value through continuous change.