en 10149-2 s700mc automotive steel material size and tolerance

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the en 10149-2 s700mc automotive steel material project. In response process of cus

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the EN 10149-2 S700MC automotive steel material project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of en 10149-2 s700mc automotive steel material customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.

The visual inspection (VI) or visual detection method is to scan the surface of the steel plate through a machine vision system (CCD line camera), convert the captured target into an image signal, and send it to a dedicated image en 10149-2 s700mc automotive steel material processing system, which converts it into a digital signal based on pixel distribution and brightness, color and other information. The system performs various operations on these signals to extract the characteristics of the target, and then controls the operation of the equipment on the spot according to the result of the discrimination. Visual detection method can achieve online high-speed detection for the en 10149-2 s700mc automotive steel material steel plate.

en 10149-2 s700mc automotive steel material, No.45 seamless pipe belongs to high quality carbon structural steel. The carbon (C) content of No.45 seamless pipe is 0.42 ~ 0.50%, Si content is 0.17 ~ 0.37%, Mn content is 0.50 ~ 0.80%, Cr content is ≤ 0.25%, Ni content is ≤ 0.30%, Cu content is ≤ 0.25%. The tensile strength, yield strength, elongation, reduction of area and impact energy of No.45 seamless pipe are 600 MPa, 355 MPa, 16% and 40% respectively. No.45 seamless pipe is used to manufacture high strength moving parts.

Firmly establish the "people-oriented, safe development" concept, strictly follow the safety production policy of "safety first, prevention first, comprehensive management", strengthen and improve the management and supervision of safety production in an all-round way, and strive to improve the controllability of safety management And effectiveness, cultivate safety culture, improve long-term safety production mechanism, and build a harmonious BEBON.