cold forming S355MC high-strength steel size range

Seamless steel tubes for high-pressure boilers are mainly used in pipes, headers, economizers, superheaters and heat exchangers of high-pressure boilers. The working pressure of seamless steel tubes for high-pressure boilers is generally above 9.8 MPa and

Seamless steel tubes for high-pressure boilers are mainly used in pipes, headers, economizers, superheaters and heat exchangers of high-pressure boilers. The working pressure of seamless steel tubes for high-pressure boilers is generally above 9.8 MPa and the working temperature is between 450℃ and 650℃. The main grades of seamless steel tubes for high pressure boilers are 15CrMoG, 12CR2MOG, 12Cr1MoV, cold forming S355MC high-strength steel, etc.. For the seamless steel tubes used for high pressure boilers, their service environment and related properties are also different for different grades.

A514 grade S high strength structural steel chemical composition (melting analysis)%
C: 0.11-0.21, Si: 0.15-0.45, Mn: 1.10-1.50, P max.: 0.035, S max.: 0.035, B max.: 0.005, Mo: 0.10-0.60, V max.: 0.06.
The mechanical properties in thickness (mm) T≤65
Yield strength (≥Mpa): 690
Tensile strength (Mpa):760-895
Elongation in ≥,%: 18

Our quality and service commitment: cold forming S355MC high-strength steel product quality problems, life-long replacement.In the process of using, any time if you find we supplied steel materials not conform to the requirements of technical standards, we can replace it for you free of charge. However, it should be noted that non product quality problems caused by improper use are not covered by the warranty. Please pay attention to the service time commitment as well as the product quality assurance commitment. Because only the products of big brands and reliable enterprises with complete after-sales service system can truly realize the long-term product quality assurance and the whole process of service.