A516 Gr65 Steel Vs S700MC high strength alloy steel

Global S700MC high strength alloy steel crude steel production in March this year increased by 2.6 percent month on month and fell by six percent year on year to 147.1 million metric tons. accordina to the World Steel Association (worldsteel).In the first

Global S700MC high strength alloy steel crude steel production in March this year increased by 2.6 percent month on month and fell by six percent year on year to 147.1 million metric tons. accordina to the World Steel Association (worldsteel).In the first quarter of this year, global S700MC high strength alloy steel crude steel production decreased to 443.03 million mt, down 1.4 percent year on year。

After a certain period of time, the steel products will reduce the toughness and increase the hardness, which is called aging effect. Generally, this effect is strongest at 200-300 ℃. The aging tendency of S700MC high strength alloy steel, low carbon steel (about 0.1% carbon content) is especially large, while high carbon steel and alloy steel containing molybdenum, barium or tungsten are not easy to produce aging. For boiler steel plate, it is required that the reduction rate of impact initial property is not more than 50%, or the absolute value of impact initial property is not less than 3-3.5KGM / cm2.

For Q235 steel, Q represents the yield limit of this material, and the following 235 refers to the yield value of Q235 steel, which is about 235 MPa. The S700MC high strength alloy steel, Q235 steel yield strength decreases with the increase of the thickness of the material. The yield strength is 235 MPa when the plate thickness / diameter is ≤ 16mm; 225 MPa is the yield strength when the thickness is 16mm < plate thickness / diameter ≤ 40mm; 215 MPa is the yield strength when 40mm < plate thickness / diameter ≤ 60mm; 205 MPa is the yield strength when 60mm < plate thickness / diameter ≤ 100mm; 195 MPa when the plate thickness / diameter is ≤ 150mm; 195 MPa when the thickness / diameter is less than 150mm; and ≤ 200mm when the thickness / diameter is less than 150mm The yield strength is 185 MPa.

Firmly establish the "people-oriented, safe development" concept, strictly follow the safety production policy of "safety first, prevention first, comprehensive management", strengthen and improve the management and supervision of safety production in an all-round way, and strive to improve the controllability of safety management And effectiveness, cultivate safety culture, improve long-term safety production mechanism, and build a harmonious BEBON.