A large of S500MC farm machinery steel from China manufacturer

Our 12Cr2Mo1VR steel plate breaks through the specification limit, with a thickness of S500MC farm machinery steel up to 180 mm and a single weight of 43.7 tons. The flaw detection can meet the highest level of NB / T47013 flaw detection level. Its thickn

Our 12Cr2Mo1VR steel plate breaks through the specification limit, with a thickness of S500MC farm machinery steel up to 180 mm and a single weight of 43.7 tons. The flaw detection can meet the highest level of NB / T47013 flaw detection level. Its thickness and unit weight exceed the production limit of vanadium steel. The 12Cr2Mo1VR steel plate with such specifications has high technical requirements, severe performance requirements, and great production difficulties. In the S500MC farm machinery steel production process, it is easy to appear the tail area defects, which will cause the steel plate to fail inspection. So please choose your suppliers carefully.

Compared with the common pressure vessel, the pressure parts of the boiler not only bear the pressure, but also suffer from the radiation and erosion of the high temperature flue gas. Once the pressure components of the boiler fail in operation, it will cause extremely serious consequences. Therefore, the S500MC farm machinery steel, steel materials used to manufacture the pressure components of the boiler must have enough high strength, plasticity, toughness, fatigue resistance and corrosion resistance, as well as good high-temperature mechanical properties for high-temperature components.

S500MC farm machinery steel, Q690 steel is low alloy high strength steel. It belongs to the Chinese GB standard steel. Q690 steel is named after its yield strength value. Q is the abbreviation of yield strength, that is, the yield strength of Q690 steel is 690 MPa. Chemical composition of Q690 steel: C ≤ 0.18, Si ≤ 0.60, Mn ≤ 2.0, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.11, V ≤ 0.12, Ti ≤ 0.20, Cr ≤ 1.00, Ni ≤ 0.80, Cu ≤ 0.80, N ≤ 0.015, Mo ≤ 0.30, B ≤ 0.004, Al ≤ 0.015. The mechanical properties of Q690 steel are: yield strength ≥ 690 MPa, tensile strength 730-940 MPa, elongation after fracture ≥ 14%, impact energy 31J.

Aspire to technological innovation and pursue first-class quality steel S500MC farm machinery steel products.Take independent innovation as an important support for the sustainable development of iron and steel industry, strengthen the main position of technological innovation, accelerate the original innovation, integrated innovation, introduction, digestion, absorption and re innovation, improve the technological innovation system, and cultivate the core technology and brand products of independent intellectual property rights.