3 3/4 inch plate en 10149-2 s315mc steel stock

Normalizing is a heat treatment that improves the toughness of steel. After the steel components are heated to 30-50°C above the Ac3 temperature, they are kept for a period of time and then air cooled. The main feature is that the cooling rate is

Normalizing is a heat treatment that improves the toughness of steel. After the steel components are heated to 30-50°C above the Ac3 temperature, they are kept for a period of time and then air cooled. The main feature is that the cooling rate is faster than annealing but lower than quenching. During normalizing, the crystal grains of the steel EN 10149-2 S315MC steel can be refined in a slightly faster cooling. Not only can satisfactory strength be obtained, but also the toughness (AKV value) can be significantly improved and reduced The tendency of the component to crack.

en 10149-2 s315mc steel, P355GH plate mechanical properties: P355GH steel plate thickness/mm:> 60-100: tensile strength σb / MPa: 490-630; yield strength σx / MPa:> = 315 Impact absorption energy AKv / J:> = 34. Steel plate thickness / mm:> 100-150: tensile strength σb / MPa: 480-630,y ield strength σx / MPa:> = 295 Impact absorption energy AKv / J:> = 34. Chemical composition % (C:0.10-0.22, Si:<=03.60, Mn:1.00-1.70, Nb:<=0.010, Ti:<=0.03 S:<=0.030, P:<=0.025, Cr:<=0.30, Ni:<=0.30, Cu:<=0.30, Mo:<=0.10, V <=0.02)

The results of adopting two-level en 10149-2 s315mc steel service system and implementing standardized management are mainly reflected in the formation of vigorous work style such as quick response and quick action. Our company's customer service center stipulates that employees must be accurate and quick in technical support and en 10149-2 s315mc steel after-sales service. Through the formation of this fast, agile, vigorous style, to provide users with satisfactory service.