S960MC with EN10204-3.1 certificate delivered to Poland

Steel S960MC with EN10204-3.1 certificate exports fell sharply year on year. According to the data of the General Administration of customs, 7.811 million tons of steel were exported from January to February, a year-on-year decrease of 27.0%; 2.041 millio

Steel S960MC with EN10204-3.1 certificate exports fell sharply year on year. According to the data of the General Administration of customs, 7.811 million tons of steel were exported from January to February, a year-on-year decrease of 27.0%; 2.041 million tons of imported steel, a year-on-year increase of 2.1%. Steel prices continue to fall. According to the monitoring of China Iron and Steel Industry Association, China's steel S960MC with EN10204-3.1 certificate composite price index at the end of January was 105.48 points, down 0.58% month on month; at the end of February, the index continued to decline to 100.39 points, down 4.83% month on month.

After more than 20 years of ups and downs in the steel industry, BBN company's customers have covered South America, North America, Europe, Africa, Southeast Asia and the Middle East and other countries and regions. We treat every customer who inquires with us sincerely, whether you cooperate with us or not, we will provide you with the best quality steel solutions. Our company team also support the online customer service.

The Indian customer purchased our A516 Gr 70 pressure vessel steel plates to make tanks. They have very strict requirement for raw materials quality. For the A516 Gr 70 pressure vessel steel plates, they asked for Normalizing, 0℃ impact, A578 UT test, PWHT and so on tests, our Q/C department witness the production process with the technician from the customer company together. Meanwhile, we arrange BV inspection to check the quantity, spray mark, stamp on the A516 Gr 70 pressure vessel steel plates, and so on.

Flame cutting uses the high temperature generated during the combustion of iron oxide to cut carbon steel S960MC with EN10204-3.1 certificate. The design of the flame cutting torch provides sufficient oxygen for burning iron oxide to ensure a good cutting effect. The CNC flame cutting machine is a mechanical equipment mainly suitable for the cutting of medium and thick plates. Compared with other similar thermal cutting methods, the CNC flame cutting machine has the characteristics of high cutting quality, good cutting surface perpendicularity, and large cutting thickness.

Compared with 15Cr steel, 20Cr alloy has higher strength and hardenability. The critical hardening diameter in oil is 4-22mm, and the critical hardening diameter in water is 11-40mm, but the toughness is poor. This S960MC with EN10204-3.1 certificate alloy steel S960MC with EN10204-3.1 certificate still has a tendency to grow grains during carburization, and direct quenching at lower temperature has a greater impact on impact toughness, so secondary quenching is required after carburization to improve the toughness of the core of the part, and there is no temper brittleness.

Management concept: abide by laws, regulations and social norms. To improve the system of management, to carry out activities with high corporate ethics. Mutual respect, unity and harmony, create a "fair, just and open" good working environment for employees. Forge ahead, constantly pursue new technology innovation, create social value, and become a sustainable growth enterprise.