4960 ton S700MC pickled steel coil to Thailand

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the S700MC pickled steel coil project. In response process of customer service cent

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the S700MC pickled steel coil project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of S700MC pickled steel coil customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.

In the manufacturing process of boiler pressure components, raw materials must undergo complex processing deformation and welding, so the steel used to manufacture the boiler must also have good process performance. All materials S700MC pickled steel coil used to manufacture pressure parts must conform to the relevant national standards for boiler steel. The defects such as delamination, non-metallic inclusion, porosity and looseness in the steel shall be as few as possible, and white spots and cracks are not allowed.

We can cut the large steel plates S700MC pickled steel coil by your requirements, but to the width and length your demand; we can make the surface of the cut steel plate to be bright by milling and grinding, also can make holes and make angle degrees, and can weld by your drawing. For the S700MC pickled steel coil product thickness under 30mm, we mainly cut by laser cutting; for thickness over 30mm, mainly OXY-cut, flame cutting. The processing plates conclude cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing.

In April 2018, our Philiphine customer purchased 1008 Tons API5L Gr.B ERW&Q345B SMLS pipe for offshore oil field resources drilling project. This is a regular demand almost two month, and we has been cooperated more than three times, totally around 2100 tons steel pipe since 2015 year.