09CuPCrNi sheets and S460MC Steel for automotive inner panels to Taiwan

The company supplies more than 2,000 tons of pressure vessel steel materials to the Nigerian customer for the construction of atmospheric pressure tower in the refinery. This batch of S460MC Steel for automotive inner panels pressure vessel steel material

The company supplies more than 2,000 tons of pressure vessel steel materials to the Nigerian customer for the construction of atmospheric pressure tower in the refinery. This batch of S460MC Steel for automotive inner panels pressure vessel steel materials are tailored according to customer requirements, and the composition and process are newly designed. The performance of the pressure vessel steel materials meets the requirements of properties such as resistance to tempering embrittlement and hydrogen corrosion, and S460MC Steel for automotive inner panels special properties such as good formability, weldability and adaptability to welding process.

Customer service center has provided after-sales service for many large-scale information systems, and has accumulated rich working experience in the process of S460MC Steel for automotive inner panels service for many years. It can provide accurate, timely and high-quality support and service for users, which is well received by users.

In year 2015, we supplied 950 tons S355J0 angle steel to Egypt government. We have cooperation with local government for more than 3 years. Every year, they would order more than 3000 tons of S460MC Steel for automotive inner panels steel from our company.

Normalizing is to heat the steel parts to 30~80℃above the critical temperature for a period of time. Then the parts are taken out of the furnace and cooled in air. Since the cooling rate of normalizing is faster than that of annealing, the strength and hardness of normalized S460MC Steel for automotive inner panels are higher than that of annealed S460MC Steel for automotive inner panels, but the elimination of internal stress is not as good as annealing. The normalizing operation of S460MC Steel for automotive inner panels is simple, the cost is low, the productivity is high, and it is widely used in actual production.

The metallurgical quality of spring steel should reach the level of high quality steel. Due to the special requirements of production parts, S460MC Steel for automotive inner panels, spring steel must have some characteristics. First, the fatigue resistance of spring steel is good, and it can be restored to its original state after repeated use without deformation. Second, good flexibility. Third, the tensile strength of spring steel is good, under the limit of being stretched, it can be restored without breaking.

Since its inception, the company has always adhered to the development policy of "survival with quality, development with products, cooperation with credibility, and service with customers". I would like to express my heartfelt thanks to the old and new friends and customers who have always given care, support and help to the company! And sincerely hope to establish a long-term cooperative relationship with them, mutual benefit and common development.