Where to purchase S500MC galvanealed coil stock products

EN10025-6 S690 steel is a quenched and tempered high-strength non-alloy steel plate. The series of grades are S690Q, S690QL, and S690QL1. They are in accordance with the European standard EN10025-6. The steel specified in this standard can be used for the

EN10025-6 S690 steel is a quenched and tempered high-strength non-alloy steel plate. The series of grades are S690Q, S690QL, and S690QL1. They are in accordance with the European standard EN10025-6. The steel specified in this standard can be used for the production of hot-rolled plates with steel grades S500MC galvanealed coil, S460, S500, S550, S620, S690, S890, S960 series steel plates with a minimum nominal thickness of 3mm and a maximum nominal thickness of ≤150mm.

Shipbuilding steel plates are used to manufacture marine and inland ship hulls, which require high strength, plasticity, toughness, cold bending performance, welding performance, and corrosion resistance. BBN steel company produces various grades steel plates for shipbuilding like AH32, AH36, AH40, DH32, DH36, EH32, EH36, S500MC galvanealed coil and can produce marine steel plates and sheets with different certificates according to client needs.

As the thickness and hardness of S500MC galvanealed coil increase, the tendency to crack at the cutting edge increases. In order to prevent the S500MC galvanealed coil from cutting cracks, preheating should be carried out before S500MC galvanealed coil cutting. Special attention should be paid to preheating to make the entire S500MC galvanealed coil interface evenly heated to avoid local overheating in the area contacting the heat source. If the whole S500MC galvanealed coil cannot be preheated, the partial preheating method can be used instead.

Keep close relationship with all manufacturers and users, cooperate sincerely, share weal and woe together. We are deeply tolerant of travelling with you! We value and value each other's career and friendship. No matter when and where, all our staff will spare no effort to put into the work, and do their best to provide S500MC galvanealed coil satisfactory services for all friends, so as to achieve win-win and multi win for each other.

Our company will accept the product quality objection registration record, pass it to the S500MC galvanealed coil production unit and relevant departments, and timely coordinate the supervision of product S500MC galvanealed coil quality objection. Our company coordinates the relevant department personnel to the customer unit to carry on the investigation, the processing.