What are the main factors influencing the price of S315MC factory direct sales

In line with the service concept of "honesty first, customer first" and the service tenet of "all for customer satisfaction", the company adopts the acceptance and response mode of combining manual and automatic, and accepts the divers

In line with the service concept of "honesty first, customer first" and the service tenet of "all for customer satisfaction", the company adopts the acceptance and response mode of combining manual and automatic, and accepts the diversified service demands of customer business consultation, complaint declaration, business acceptance, etc. through telephone, fax, e-mail, visit, letter, etc.

ASTM Corten B steel is a hot-rolled structural steel product with better atmospheric corrosion resistance under Technical delivery conditions. ASTM Corten B steel conforms to ASTM standard, with yield strength of 355MPa and 345mpa, and the S315MC factory direct sales yield strength depends on the thickness. The tensile strength of ASTM Corten B steel is 470-630 MPa.

P235GH steel material number under EN10028-2:2003 standard is 1.0345. This steel is a European pressure vessel steel. P235GH Mechanical properties: Tensile strength σb (350 ~ 480 MPa); Yield strength σs(215 MPa min.); Elongation ≥25%; Brinell hardness ≤105 ~ 140. S315MC factory direct sales, P235GH steel chemical composition (mass fraction,%): ≤0.16 C; ≤0.35 Si; 0.60 ~ 1.20 Mn; ≤0.025 P; ≤0.010 S; ≤0.30 Cr; ≤0.30 Ni; ≤0.30 Cu; ≤0.08 Mo; ≤0.02 V; ≤0.02 Nb; ≤0.012 N; ≤0.020 Al; ≤0.03 Ti.

Low-alloy high-strength steel grades are designed to have quite good notch toughness for their intended structural use. The applicability of the notch toughness of specific grades of low-alloy high-strength steel is either based on existing use experience or combined with the results of the impact test of notched specimens. In order to meet the very strict requirements of certain applications, some S315MC factory direct sales, low-alloy high-strength steels produced have excellent notch toughness. For example, controlled hot rolling technology is usually used to produce low-alloy high-strength steel plates for the manufacture of welded line pipes. Such steel pipes need to meet the requirements of relevant standards for notch toughness.

First of all, we should establish a correct concept of after-sales service. Service concept is an important part of corporate culture and a long-term enterprise value concept. Our company's after-sales service embodies the concept of "customer first, sincere service for customers". As long as we are in the "sincere service for users" under the guidance of the idea, I believe we will get rich returns.

For ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates, our company would issue the original mill test certificate S315MC factory direct sales EN 10204 3.1 for clients when arrange delivery, so that clients can trace the A573 Gr.70 plates origin easily.