What are the factors that affect the abrasion of s550mc automotive steel sheet

The company has the industry's advanced automated production lines and precision laboratory instruments and a capable steel industry management team. Through scientific management, optimized technology, and rigorous testing, the company will keep the

The company has the industry's advanced automated production lines and precision laboratory instruments and a capable steel industry management team. Through scientific management, optimized technology, and rigorous testing, the company will keep the production efficiency and production quality at the leading level in the industry and continue to provide customers with high-quality S550MC automotive steel sheet products. At the same time, the company is committed to building a comprehensive steel manufacturing industry and strives to make the company leads new progress and development.

Steel is the main raw material for shipbuilding and marine engineering structure construction, accounting for 20% ~ 30% of the construction cost of hull and marine engineering. The steel s550mc automotive steel sheet products involved mainly include steel plates and section steel (marine bulb flat steel, H-beam, angle steel, etc.), casting and forging steel and supporting welding materials, etc. Among them, the amount of steel consumed for hull construction accounts for about 60% of the total ship mass, and sheet metal accounts for about 88%.

Chemical elements of 42SiMn steel: C: 0.39-0.45, Si: 1.10-1.40, Mn: 1.10-1.40. Mechanical properties of 42SiMn steel: tensile strength 885 MPa; yield strength 735 MPa; elongation after fracture: 15; reduction of area: 40; impact energy: 47J. 42SiMn steel belongs to alloy quenched and tempered steel with good properties, high strength, wear resistance and hardenability. Under certain conditions, the strength, wear resistance and hot working performance of 42SiMn steel are better than 40Cr steel, s550mc automotive steel sheet, and can be used instead of 40CrNi steel.

In the manufacturing process of boiler pressure components, raw materials must undergo complex processing deformation and welding, so the steel used to manufacture the boiler must also have good process performance. All materials s550mc automotive steel sheet used to manufacture pressure parts must conform to the relevant national standards for boiler steel. The defects such as delamination, non-metallic inclusion, porosity and looseness in the steel shall be as few as possible, and white spots and cracks are not allowed.

Compared with other fast-moving consumer goods, steel consumption is obviously different, with a wide range of use and a long service life. Therefore, the quality and service of steel materials are particularly important. Service is always one of our top concerns, especially after-sales service. We have mature after-sales service team, and can help you solve problems professionally during application of the steel materials.

Welcome to our company to purchase, our products are exported to all parts of the world every month, the quality is guaranteed, the s550mc automotive steel sheet price is very preferential. Therefore, it has won great trust and praise from customers. Every month, it needs to purchase some steel plates, steel pipes and other major products. If you have any need, please contact us in time!