Welding performance of S 355 MC

Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole w

Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole work procedure run smoothly. For every step, we have special person to be in charge and responsible for our customer and update information to the customer in time. So you just need not worry too much to purchase steel materials from our company.

Q355NHE grade is a weather-resistant structural steel used in construction, bridges, and railway vehicles. Q represents yield strength, NH represents weather resistance, and E represents quality grade (A, B, C, D, E) composition. Q355NHE is an atmospheric corrosion-resistant steel plate, also called weather-resistant steel plate. It has the properties of high-quality steel such as strength, ductility, forming, welding, abrasion, high temperature, and fatigue resistance.

The chemical composition difference between S 355 MC, Q235B and 20# steel is as follows:
The chemical composition of 20# steel: C: 0.17-0.23%, Si: 0.17-0.37%, Mn: 0.35-0.65%, Cr: ≤ 0.25%, Ni: ≤ 0.30%, Cu: ≤ 0.25%. Chemical composition of Q235B steel: C: ≤ 0.20%, Si: ≤ 0.35%, Mn: ≤ 1.40%, P: ≤ 0.045%, S: ≤ 0.045%.
The difference of mechanical properties between S 355 MC, Q235B and 20# steel is as follows:
The mechanical properties of 20# steel: tensile strength 410 MPa; yield strength 245 MPa; elongation after fracture: 25; reduction of area: 55; no impact. Q235B steel mechanical properties: tensile strength 370-500 Mpa; yield strength: ≥ 235 Mpa; elongation after fracture: 25; impact absorption energy: 27J.

Special boiler steel is derived from carbon structural steel, S 355 MC. The expression of boiler steel grade is similar to that of high-quality carbon structural steel, and the carbon content is usually 0.20%. The chemical composition of boiler steel is basically the same as that of high-quality carbon structural steel of the same brand, but the mechanical properties are strictly required, especially the impact toughness, and the aging sensitivity is required to be small. After deoxidation and removal of non-metallic inclusions, boiler steel has a uniform structure, the grain size is controlled at 3-7 grade, and the defects such as interlayer, shrinkage, porosity and porosity are relatively less.

Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.

our company is leading supplier of API 5CT casing pipes in China. N80 oil casing pipes enjoy high size precision, good weld toughness, S 355 MC good extrusion resistance, easy quality control and low cost features. Welcome to our company to purchase S 355 MC API 5CT N80 and so on casing pipes.