Top 10 1.8976 special steel for automobiles manufacturers

BBN company team and culture: tt the end of 2019, in order to thank employees for their hard work and enrich their sparetime lives, the company organized a pleasant trip to Phuket Island, Thailand. This tour lasted 6 days and 5 nights, and returned by pl

BBN company team and culture: tt the end of 2019, in order to thank employees for their hard work and enrich their sparetime lives, the company organized a pleasant trip to Phuket Island, Thailand. This tour lasted 6 days and 5 nights, and returned by plane on the evening of December 27. We took off in Zhengzhou at about 5o'clock in the afternoon on the 22th December. Let's seize the day and live it to the full, and greet the arrival of the year 2020 together.

Structural steel for bridges is mainly used to make riveted and bolted welded bridge steel structures such as highway bridges, railway bridges, sea-crossing bridges, overpasses, viaducts, and large mechanical bridge cranes. 1.8976 special steel for automobiles, E grade bridge steel is suitable for low temperature and severe cold environment or bridge structural parts that are subjected to dynamic loads and the stress conditions of components are very complex and harsh.

16Mo3 alloy are featured by the good heat resistance and corrosion resistance. 16Mo3 steel plate chemical composition(%):C: 0.12 ~ 0.2 Si: ≤0.35 Mn: 0.4 ~ 0.9 P: ≤0.025 S: ≤0.01 Cu: ≤0.3 Ni: ≤0.3 Cr: ≤0.3 Mo: 0.25 ~ 0.35 Al: ≥0.02 N: ≤0.012. 16Mo3 alloy steel mechanical properties:Yield strength (MPa) 372MPa, Tensile strength (MPa) 350MPa, Elongation (%) ≥22. Impact temperature (℃) 20, Impact energy value (J) 335J / cm². 1.8976 special steel for automobiles, 16Mo3 steel plate is widely used in petroleum, chemical, power station, boiler and other industries.

20G steel is a common carbon steel used to manufacture boilers. The performance of 20G steel is basically the same as that of 20# steel. The requirements for impact toughness, strain aging impact value and cold bending of 20G steel are increased. The yield ratio of 20G steel is slightly higher, and certain fatigue and corrosion resistance are required for 1.8976 special steel for automobiles steel to ensure the safe operation of boilers. 20G steel is suitable for manufacturing marine boilers, steam boilers and other boiler accessories with pressure less than 6Mpa and wall temperature less than 450 ℃.

The results of adopting two-level 1.8976 special steel for automobiles service system and implementing standardized management are mainly reflected in the formation of vigorous work style such as quick response and quick action. Our company's customer service center stipulates that employees must be accurate and quick in technical support and 1.8976 special steel for automobiles after-sales service. Through the formation of this fast, agile, vigorous style, to provide users with satisfactory service.

Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our 1.8976 special steel for automobiles products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.