The strength and shortcomings of din en 10149-2

It is very important for an enterprise to have a sound after-sales service system, which not only ensures the normal outflow and inflow of the company's products, but also improves the trust of the company's products in the hearts of customers.

It is very important for an enterprise to have a sound after-sales service system, which not only ensures the normal outflow and inflow of the company's products, but also improves the trust of the company's products in the hearts of customers. Our company has a special after-sales service team and good after-sales service reputation. In case of any problem in the use of our steel products din EN 10149-2 , whether quality problem or not, the after-sales service department will assist in solving the problem as soon as possible, and regularly consult and track the use of the steel products.

ASTM A283 steel din en 10149-2 is a carbon steel plate used for general structural purposes. This steel has low strength and medium strength. It has two steel grades (C and D). For steel coils or unheated steel plates, additional stress relief tests should be carried out. Usually, inspections, inspections, and din en 10149-2 heat treatments should be carried out before leaving the factory after the coils are opened.

The difference between din en 10149-2, 10# seamless steel pipe and 20# seamless steel pipe:
1. Chemical composition
Chemical composition of 10# seamless steel pipe: C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. Chemical composition of 20# seamless steel pipe: C: 0.07-0.23, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.25, Ni: 0.30, Cu: 0.25
2. Mechanical properties
10# seamless steel pipe: tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%. 20# seamless steel pipe: tensile strength: 410 MPa, yield strength: 245 MPa, elongation: 25%.

Alloy spring steel is a kind of steel which can improve the mechanical properties, hardenability and other properties of the steel by adding some alloy on the basis of carbon steel to meet the requirements of manufacturing various springs. Its advantages are that it integrates other materials, making spring more stable, durable, long life. din en 10149-2, Alloy spring steel has high elastic limit, high yield ratio, high fatigue strength and enough toughness.

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.

Since its establishment, the company has participated in several key railway and highway projects. After years of development, the company’s din en 10149-2 domestic market has been exported to more than a dozen provinces and cities including Kunming, Shenzhen, Hunan, Sichuan, Shanghai, Nanjing, Heihe, Jilin, Inner Mongolia, and Xinjiang . International trade is exported to Kazakhstan, South Korea, Vietnam, South Africa and many other countries, and has been well received by customers.