The latest s355mc high strength steel auto plate en 10149-2 price on China market

SA516Gr60 material, SA516Gr70, SA516Gr60N, SA516Gr70N steel plate in thickness ≤1.5in (40mm) is usually supplied in rolled state. The plate can also be ordered according to normalizing or stress relief, or normalizing plus stress relief. SA516Gr60

SA516Gr60 material, SA516Gr70, SA516Gr60N, SA516Gr70N steel plate in thickness ≤1.5in (40mm) is usually supplied in rolled state. The plate can also be ordered according to normalizing or stress relief, or normalizing plus stress relief. SA516Gr60 steel plate when thickness> 1.5in. (40mm) should be normalized. Unless otherwise specified by the customer, S355MC high strength steel auto plate EN 10149-2, SA516Gr60 steel plate (thickness ≤40mm) should be normalized when there is a notch toughness requirement.

The company now has s355mc high strength steel auto plate en 10149-2 oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than s355mc high strength steel auto plate en 10149-2 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.

Ultrasonic flaw detection emits ultrasonic waves to the s355mc high strength steel auto plate en 10149-2 steel plate under inspection. If there are defects in the steel plate, the ultrasonic waves will reflect, refract or deform waveforms due to the defects. By recording these changes, the type and shape of the defects are analyzed. Due to its high energy and good penetration performance, and the smoothness of the s355mc high strength steel auto plate en 10149-2 steel plate itself, ultrasound is often used to detect defects such as inclusions, shrinkage holes, bubbles, and cracks in the steel plate.

The steel such as s355mc high strength steel auto plate en 10149-2 delivered in the hot-rolled state has a certain degree of corrosion resistance due to the high temperature, so it can be stored in the open air. However, this layer of oxide scale also makes the hot-rolled steel surface rough and the size fluctuates greatly. Therefore, the steel with smooth surface, accurate size and good mechanical properties is required to be produced by using hot-rolled semi-finished products or finished products as raw materials and then cold rolling.

The company attaches great importance to the cultivation of team spirit. Personal strength is weak. After sales service departments, leaders and subordinates often communicate with each other. Everyone often holds meetings to discuss their problems in after-sales service, discuss technical difficulties, discuss how to improve work efficiency, how to better deal with user complaints, etc.