Supply shipbuilding material s420mc en 10149-2 galvanealed coil

SA516Gr60 material, SA516Gr70, SA516Gr60N, SA516Gr70N steel plate in thickness ≤1.5in (40mm) is usually supplied in rolled state. The plate can also be ordered according to normalizing or stress relief, or normalizing plus stress relief. SA516Gr60

SA516Gr60 material, SA516Gr70, SA516Gr60N, SA516Gr70N steel plate in thickness ≤1.5in (40mm) is usually supplied in rolled state. The plate can also be ordered according to normalizing or stress relief, or normalizing plus stress relief. SA516Gr60 steel plate when thickness> 1.5in. (40mm) should be normalized. Unless otherwise specified by the customer, S420MC EN 10149-2 galvanealed coil, SA516Gr60 steel plate (thickness ≤40mm) should be normalized when there is a notch toughness requirement.

S500MC steel plate/sheet,EN10149 S500MC steel plate/sheet, under EN standard, we can regard S500MC steel plate/sheet as high yield strength steels for cold-forming steels. s420mc en 10149-2 galvanealed coil, EN10149 S500MC is mainly used as high yield strength steels for cold-forming steels. The EN10149 S500MC steel is equivalent to SEW092 QStE500TM, NFA E490D, UNI FeE490TM and ASTM X70XLK steel grades.

Our company will accept the product quality objection registration record, pass it to the s420mc en 10149-2 galvanealed coil production unit and relevant departments, and timely coordinate the supervision of product s420mc en 10149-2 galvanealed coil quality objection. Our company coordinates the relevant department personnel to the customer unit to carry on the investigation, the processing.