Structural steel S315MC automotive steel factory direct sales in Mongolia

ASME S315MC automotive steel factory direct sales delivery status: thickness ≤40, hot rolled or normalized; thickness ＞40, normalizedAccording to the different tensile strength of the material, ASME SA204 steel is divided into three strength grades

ASME S315MC automotive steel factory direct sales delivery status: thickness ≤40, hot rolled or normalized; thickness ＞40, normalized
According to the different tensile strength of the material, ASME SA204 steel is divided into three strength grades: A, B, and C, namely SA204GrA, SA204GrB, and SA204GrC. The maximum thickness of steel plates corresponding to these three grades is limited to:
SA-204A large plate thickness does not exceed 150mm
SA-204B large plate thickness does not exceed 150mm
SA-204C large plate thickness does not exceed 100mm

NM450 steel plate thickness≦80mm. S315MC automotive steel factory direct sales, NM450 wear-resistant steel plates are used in engineering machinery, mining machinery, coal mining machinery, environmental protection machinery, metallurgical machinery, abrasive tools, bearings and other product parts.NM450 Cchemical composition: C≤0.35; Si≤0.70; Mn≤1.70; P≤0.025; S≤0.010; Cr≤1.10; Ni≤0.80; Ti≤0.050; Mo≤0.55; B: 0.0005-0.006; Al≥0.010. Mechanical properties: Tensile strength Rm / MPa ≧ 25; -20 ℃ impact energy absorption (longitudinal) KV2 / J ≧ 24Surface Brinell hardness HBW: 420-480

After-sales service is an important part of measuring a product good or not. After sales service can't be ignored. Good service can really make consumers feel relieved. We have always done a good job in after-sales service, so as to bring consumers a better reference when purchasing and a better experience during use of our steel materials. We will call back and follow up the performance of our steel products regularly.