Stock S500MC tensile test specification

Q690D material is a Chinese standard high-strength welded structural steel. What does Q690D stand for? Q represents the yield strength, 690 represents the yield strength value, and D represents the quality of the Q690 steel. The quality grades are A, B, C

Q690D material is a Chinese standard high-strength welded structural steel. What does Q690D stand for? Q represents the yield strength, 690 represents the yield strength value, and D represents the quality of the Q690 steel. The quality grades are A, B, C, D, and E, respectively. The impact of Grade D steel plate is﹣20°C. Q690D executive standard: GB / T1591-2008. S500MC tensile test, Q690D steel has high yield strength and tensile strength.

Weathering steel is characterized in that the alloy composition and weight percentage content. The chemical composition C≤0.12, Si: 0.25 ～ 0.75, Mn: 0.20 ～ 0.50, P: 0.07 ～ 0.15, S≤0.03, Cu: 0.25 ～ 0.55 , Cr: 0.30 ～ 1.25, Ni≤0.65, and the rest are Fe and trace impurities. Weathering steel sheet S500MC tensile test is mainly used for steel structures such as railways, vehicles, bridges, and towers that are exposed to the atmosphere for a long time.

Hot rolled S500MC tensile test steel coil and plates are among our main products. Hot rolling can significantly reduce energy consumption and cost. During hot rolling, the metal has high plasticity and low deformation resistance, which greatly reduces the energy consumption of metal deformation. Hot rolling can improve the S500MC tensile test processing properties of metals and alloys, that is, the coarse grains in the casting state are broken, cracks are obviously healed, casting defects are reduced or eliminated, the as cast structure is transformed into deformed structure, and the processing properties of alloys are improved.

It is a modern high-tech professional enterprise integrating scientific research, S500MC tensile test production and sales. The company is mainly engaged in the manufacture, installation and commissioning of boiler and pressure vessel, chemical, metallurgical, petroleum and other equipment, as well as S500MC tensile test process technology development, technology transfer and related technical consulting and technical services.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.