S960MC auto steel flat equivalent din material

The gas cylinder steel coil and sheets are our main products. Our main conducted standards for gas cylinder steel coil and sheets are JIS G3116, GB6653, EN10120. The typical gas cylinder steel grades are SG255, SG295, SG325, HP265, HP295, HP325, P245NB, P

The gas cylinder steel coil and sheets are our main products. Our main conducted standards for gas cylinder steel coil and sheets are JIS G3116, GB6653, EN10120. The typical gas cylinder steel grades are SG255, SG295, SG325, HP265, HP295, HP325, P245NB, P265NB, P310NB, P355NB, etc. For the gas cylinder steel coil S960MC auto steel flat, we provide slitting, cutting, and stamping service. So as to meet different size and shape requirements of the customers. The gas cylinder steel coil and sheets are mainly used to make gas cylinders.

The amount of Vanadium in steel material is generally between 0.04% and 0.12%. The role of Vanadium is to affect the microstructure and properties of steel material. It mainly precipitates in the ferrite at the austenite grain boundary, and can inhibit the recrystallization of austenite and prevent the crystal during rolling. The grains grow, which refines the ferrite grains and improves the strength and toughness of S960MC auto steel flat etc. steel material.

The wear-resistant plate has the main advantages of high strength and hardness, good toughness, S960MC auto steel flat high tensile strength, good material wear-resistance, long service life and low cost. In order to verify the wear-resistant life of the high wear-resistant composite steel plate applied in the field, the comparative industrial test of S960MC auto steel flat wear-resistant with the ordinary carbon plate was carried out on the reclaimer of Jigang raw material plant, and the effect is good.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.