S900MC cold rolled oil exporting tensile strength

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the S900MC cold rolled oil exporting project. In response process of customer servi

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the S900MC cold rolled oil exporting project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of S900MC cold rolled oil exporting customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.

Our company can produce S900MC cold rolled oil exporting, EN10025-2 S355J2 structural steel plates and sheets up to 400mm thickness. S355J2 steel consists of S ( for structural steel), 355 (indicates the minimum specified yield strength value in MPa for thickness less than 16mm), J2( for a minimum impact energy value of 27J at -20ºC). EN S355J2 structural steel plates are suitable for cold flanging, delivery condition normalized rolled or as rolled.

Asme sa514 grade B quenched and tempered alloy steel element composition%
C: 0.12-0.21, Si: 0.20-0.35, Mn: 0.70-1.00, P max.: 0.035, S max.: 0.035, B max.: 0.005, Cr: 0.40-0.65, Mo: 0.15-0.25, V: 0.03-0.08, Ti: 0.01-0.03
The mechanical properties in thickness (mm)T≤65
Yield strength (≥Mpa): 690
Tensile strength (Mpa):760-895
Elongation in ≥,%: 18

Wear resistant steel plate has high wear resistance and good impact performance. It can be cut, bent, welded, etc. This material S900MC cold rolled oil exporting can be connected with other structures by welding, plug welding, bolt connection, etc. Wear resistant steel plate has the advantages of saving time and convenience in the process of maintenance. It is widely used in metallurgy, coal, cement, electric power, mining, building materials and other industries. Compared with other materials, wear resistant steel plate has a high cost performance, and has been favored by more and more industries.

We should help solve the customer's problems in time, not just verbally, without solving the problems or shirking the responsibility. Improving after-sales efficiency can make customers feel respect. We should take their problems seriously and show sincerity. It can also give customers a good impression and reduce the negative impact.

Our company has strict quality control standards. If you want to visit our factory, you are welcome at any time! We produce a lot of steel products every month to export S900MC cold rolled oil exporting to all over the world. Because our customers are from all countries, they will order a large number of steel products from our company every month.