s500mc steel equivalent astm steel coil continuous annealing

Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems

Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;

Carbon steel S500MC steel equivalent astm is an iron carbon alloy with carbon content less than 2.11% and a small amount of silicon, manganese, sulfur, phosphorus and other impurities. Carbon steel inevitably contains some impurity elements during smelting, which has a great influence on the performance and quality of steel, so it should be controlled. The quality of carbon steel is mainly measured by the content of sulfur and phosphorus. The lower the s500mc steel equivalent astm content of sulfur and phosphorus, the better the quality of carbon steel.

JIS g3101:2004 ss540 structural steel angle contains 0.30% carbon and 1.60% manganese, which greatly improves the strength of steel. Compared with s500mc steel equivalent astm SS400 and ss490, ss540 has higher strength with yield strength of 400MPa and tensile strength of 540Mpa. High strength makes it popular in applications that require strength but weight is a problem.

The wear-resistant plate s500mc steel equivalent astm shows good wear resistance: the chemical composition of the alloy layer contains 4-5% carbon and 25-30% chromium. The volume fraction of Cr7C3 carbide in the metallographic structure is more than 50%, the macro hardness is HRC56-62, and the hardness of chromium carbide is HV1400-1800. Because of the vertical distribution of carbides in the wear direction, the wear resistance of the cast alloy with the same composition and s500mc steel equivalent astm hardness is more than twice as that of the cast alloy with the same composition and hardness. Compared with several typical materials, the wear resistance is as follows: (1) compared with low carbon steel; 20-25:1 (2) with as cast high chromium cast iron; 1.5-2.5:1.

We guarantee to provide all technical data required by users within one hour to provide reasonable quotation; to provide s500mc steel equivalent astm reasonable quotation for products consulted by users within one hour; to provide investigation reception: we guarantee to receive the investigation of users at any time and provide various convenient conditions for users.

It is a modern high-tech professional enterprise integrating scientific research, s500mc steel equivalent astm production and sales. The company is mainly engaged in the manufacture, installation and commissioning of boiler and pressure vessel, chemical, metallurgical, petroleum and other equipment, as well as s500mc steel equivalent astm process technology development, technology transfer and related technical consulting and technical services.