S500MC steel complete specifications Price in Belarus 2020

BBN is a S500MC steel complete specifications world leader in exporting A106 / SA 106 pipe and stocks a full range of grades B/C with a size rage NPS 1/8" to NPS 48", with nominal (average) wall thickness as given in B36.10.In view of the charac

BBN is a S500MC steel complete specifications world leader in exporting A106 / SA 106 pipe and stocks a full range of grades B/C with a size rage NPS 1/8" to NPS 48", with nominal (average) wall thickness as given in B36.10.

In view of the characteristics of container transportation, such as high added value, low cargo damage and short time, our company takes more consideration of port collection and distribution conditions, port facilities, flight density and route coverage when choosing ports. For the convenience of customers, as well as the safety of goods.

The main applications of normalizing are as follows:①For low carbon steel, S500MC steel complete specifications. The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting.②For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating.③Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing.④Normalizing can refine the cast structure and improve the machinability of steel castings.

In 2013, one of our clients in Korea purchased 890 tons Q345B square tube from us for one building construction project. Our clients required no burr in the side of the tube, we finally produce the goods with great condition and +/-0.25mm tolerance for wall thickness, which is a very great tolerance with customers’ required size. Our square tube full available range is 2-16mm for wall thickness, and 40-500mm for width. In addition, our Q/C department will seriously control all of the process of every order.

There are a lot of ASTM standards for pressure vessel steel plates. Such as ASTM A204, A285, A302, A387, A515, A516, A517, A537, A612, A841, etc. Those ASTM steel plates have different thickness ranges. S500MC steel complete specifications, ASTM A204 plates shall not thicker than 150mm. ASTM A285 plates shall not thicker than 50mm. ASTM A515 plates shall not thicker than 200mm. ASTM A517 plates and A537 plates shall not thicker than 150mm. ASTM A612 plates shall not thicker than 25mm. ASTM A841 plates shall not thicker than 100mm.

To the society: With the development of the company, BEBON has always adhered to the development mission of "developing heavy industry for the benefit of all mankind; improving the environment and achieving sustainable development”, operating with integrity and paying taxes in accordance with law.For our employees, the company fully respect employee value, pursuing mutual development of enterprise and employees.