S500MC hot rolled steel for car shell pipeline steel sheet price
BEBON cpompany practice new development concepts, expand in an all-round way, deepen reform and innovation, speed up transformation and upgrading, become stronger, better and bigger, accelerate the implementation of BEBON Steel's S500MC hot rolled st
BEBON cpompany practice new development concepts, expand in an all-round way, deepen reform and innovation, speed up transformation and upgrading, become stronger, better and bigger, accelerate the implementation of BEBON Steel's S500MC hot rolled steel for car shell industrial planning, and realize the revitalization and development of enterprises.Fully implement the corporate S500MC hot rolled steel for car shell market dominant position, comprehensively promote contractual management, and promote the transition from "internal production" to "market operation”.
Accept the inquiry from the owner of the goods and the inquiry by sea: master the port and price from the port of shipment to all continents and routes, and the port and price that the owner often needs to serve; the shipping schedule information of the main shipping companies; when necessary, ask the owner of the inquiry for some category information, such as the name of the goods, the level of danger, etc. (water hazard code).
Weathering steel generally adopts the process route of fine material into the furnace-smelting (converter, electric furnace-microalloying treatment-argon blowing-LF refining-low superheat continuous casting (feeding rare earth wire)-controlled rolling and cooling. The scrap steel is added into the furnace together with the charge, and smelted according to the conventional process. After the S500MC hot rolled steel for car shell steel is tapped, deoxidizers and alloys are added. After the molten steel is treated with argon blowing, the molten steel is cast. By adding rare earth elements to the steel, the S500MC hot rolled steel for car shell weathering steel is purified and the content of inclusions is greatly reduced.
On September 14th 2019, a Australia customer purchased 500 tonsDIN17155 15Mo3 boiler steel plates, which will be used for vessel modification of wax backflow protection project and LPU project. Many old customers keep asking about Din17155 steel grade-15Mo3. Usually our company would suggest customers to choose EN10028 steel specification, but if customer insiste on the old steel grade, we could arrange it either. With years of experience in produceing DIN 17155 15Mo3 boiler steel plates, the company supplies high quality steel S500MC hot rolled steel for car shell product with low cost and better service.
The executive standard of P235TR1 steel is EN 10216-1. S500MC hot rolled steel for car shell, P235TR1 steel is suitable for manufacturing pipes, vessels, equipment, pipe fittings and steel structures. Chemical composition of P235TR1 steel: C ≤ 0.16, Si ≤ 0.35, Mn ≤ 1.2, P ≤ 0.025, S ≤ 0.02, Cr ≤ 0.30, Mo ≤ 0.06, Ni ≤ 0.30, Cu ≤ 0.30, Nb ≤ 0.01, Ti ≤ 0.04, V ≤ 0.02. Chemical composition of P235TR1 steel: tensile strength 360-500 MPa, yield strength ≥ 235 MPa, elongation ≥ 25%. The main steel pipe grades under EN 10216-1 are P195TR1, P195TR2, P235TR1, P235TR2, P265TR1 and P265TR2.
Company management philosophy: integrity-based, service-oriented, excellence, affinity symbiosis. Based on quality, continuously create maximum value for customers. Always have a grateful heart, thank the society, thank family and friends for their support and help to the development of the company, thank customers for their trust, thank colleagues for their cooperation, and thank competitors for their supervision.
Leave a message