S500MC hot rolled automotive steel coil inventory with 15 thickness range

According to the economic development trend in Asia and the economic development of China, India, Japan and ASEAN, it is estimated that the steel consumption in Asia will be 1228 million tons in 2019, with a year-on-year growth of 6.6%; the S500MC hot rol

According to the economic development trend in Asia and the economic development of China, India, Japan and ASEAN, it is estimated that the steel consumption in Asia will be 1228 million tons in 2019, with a year-on-year growth of 6.6%; the S500MC hot rolled automotive steel coil inventory steel demand in Asia in 2020 is predicted to be 1.241 billion tons, with a year-on-year growth of 1.1%. According to the S500MC hot rolled automotive steel coil inventory economic development of Europe, it is estimated that the steel consumption in Europe will be 202 million tons in 2019, with a year-on-year decrease of 3.3%; the steel demand in Europe in 2020 is predicted to be 205 million tons, with a year-on-year growth of 1.5%.

The hardness and impact toughness of precipitation-strengthened wear plates, S500MC hot rolled automotive steel coil inventory are also improved. For example, the hardness of the wear-resistant plate after precipitation strengthening is 230-300 HBW, and the impact toughness is 140-180. More importantly, the improvement of the above indicators does not bring about a significant decrease in plasticity. The performance of the wear-resistant plate after water quenching at 1100℃, first holding at different temperatures in the middle temperature zone, and then water quenching at 970℃. With the increase of the holding temperature in the middle temperature zone and the extension of the holding time, the number of carbides in the steel increases, and the precipitation strengthening effect increases, resulting in an increase in hardness.

S420MC hot-rolled automobile structural steel chemical composition (melting analysis)%
C: ≤0.12, Si: ≤0.50, Mn: ≤1.60, P: ≤0.025, S: ≤0.020, Alt: ≥0.015, Nb: ≤0.09, V: ≤0.20, Ti: ≤0.10
Mechanical properties
Yield strength MPa: ≥420
Tensile strength MPa: 480-620
Elongation: ≥16

Company management philosophy: integrity-based, service-oriented, excellence, affinity symbiosis. Based on quality, continuously create maximum value for customers. Always have a grateful heart, thank the society, thank family and friends for their support and help to the development of the company, thank customers for their trust, thank colleagues for their cooperation, and thank competitors for their supervision.