S460MC steel for earth moving machines iron and steel testing

Our technical department plays important role in our professional communication with customers, especially those who have high technical requirements for steel materials and those who need complex further processing. Under such condition, our technician d

Our technical department plays important role in our professional communication with customers, especially those who have high technical requirements for steel materials and those who need complex further processing. Under such condition, our technician department can provide technical support in time, anylize customer design or make drawing according to customer needs rapidly, so that we can proceed smoothly. The profession of our team has won great praise of customers.

Can S460MC steel for earth moving machines, 40Cr material be replaced with 40MnB steel? 40MnB steel is used to manufacture small and medium-sized important quenched and tempered parts in tractors, automobiles and other general machinery and equipment, such as automobile half shafts, steering shafts, spline shafts, worms and machine tool spindles, gear shafts, etc. 40MnB steel can replace 40Cr material to make parts with larger cross-sections, such as the middle shaft of a hoist. And 40MnB steel can replace 40CrNi steel when making small-sized parts.

What is the difference between Q345B steel and Q345A steel?
S460MC steel for earth moving machines, Q345B steel and Q345A steel have slight difference in chemical composition:
Q345A steel: C ≤ 0.20, Mn ≤ 1.7, Si ≤ 0.55, P ≤ 0.045, S ≤ 0.045, V 0.02 ~ 0.15;
Q345B steel: C ≤ 0.20, Mn ≤ 1.7, Si ≤ 0.55, P ≤ 0.040, S ≤ 0.040, V 0.02 ~ 0.15.
The difference between Q345B steel and Q345A steel is mainly in A and B behind the steel grade, Q345A steel grade is not subject to impact; Q345B steel grade needs 20 ℃ room temperature impact test.

Compared with 15Cr steel, 20Cr alloy has higher strength and hardenability. The critical hardening diameter in oil is 4-22mm, and the critical hardening diameter in water is 11-40mm, but the toughness is poor. This S460MC steel for earth moving machines alloy steel S460MC steel for earth moving machines still has a tendency to grow grains during carburization, and direct quenching at lower temperature has a greater impact on impact toughness, so secondary quenching is required after carburization to improve the toughness of the core of the part, and there is no temper brittleness.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.

Welcome to our company to purchase, our products are exported to all parts of the world every month, the quality is guaranteed, the S460MC steel for earth moving machines price is very preferential. Therefore, it has won great trust and praise from customers. Every month, it needs to purchase some steel plates, steel pipes and other major products. If you have any need, please contact us in time!