S460MC hot rolled flat for coil steel

The Indian iron and S460MC hot rolled flat Steel Association (ISA) lowered its steel demand forecast for 2020 to 5.1% from 5.1% in February this year. The figure is expected to hit a low of 7.7%. The company said in an official statement that the current

The Indian iron and S460MC hot rolled flat Steel Association (ISA) lowered its steel demand forecast for 2020 to 5.1% from 5.1% in February this year. The figure is expected to hit a low of 7.7%. The company said in an official statement that the current share price has fallen sharply due to the huge downside risk. "We expect India's finished steel demand to fall to about 93.7 million tons by 2020, down from 101.5 million tons in 2019." This calendar year, the S460MC hot rolled flat decline was 7.7%, about 8 million tons. " Isa said.

In line with the service concept of "honesty first, customer first" and the service tenet of "all for customer satisfaction", the company adopts the acceptance and response mode of combining manual and automatic, and accepts the diversified service demands of customer business consultation, complaint declaration, business acceptance, etc. through telephone, fax, e-mail, visit, letter, etc.

Normalizing is a heat treatment that improves the toughness of steel. After the steel components are heated to 30-50°C above the Ac3 temperature, they are kept for a period of time and then air cooled. The main feature is that the cooling rate is faster than annealing but lower than quenching. During normalizing, the crystal grains of the steel S460MC hot rolled flat can be refined in a slightly faster cooling. Not only can satisfactory strength be obtained, but also the toughness (AKV value) can be significantly improved and reduced The tendency of the component to crack.

S460MC hot rolled flat, Grade P295GH chemical composition under EN10028-2:2003 is displayed as follows. Chemical composition (C: 0.08 to 0.20; Cr: ≤0.30; Si: ≤0.40; Cu: ≤0.30;Mn: 0.90 to 1.50; Mo: ≤0.08;P: ≤0.025; Nb: ≤0.020;S: ≤0.015; Ni: ≤0.30;Al: ≤0.020; Ti: 0.03; N: ≤0.012; Vi: ≤0.02). The yield Strength MPa (min) of P295GH steel plate with thickness less than 16mm is 295MPa, and the tensile strength is 460-580MPa.

Our client purchase more than 900 tons pipe S460MC hot rolled flat from India. And we do the inspection for each one pipe before shipment.During the inspection, the inspector saw that the surface of the square pipe kept the original color of the stainless steel, no fracture, no depression and other quality defects was found.

Our products have perfect after-sales system to protect the interests of customers. At the same time, we can according to S460MC hot rolled flat customer's requirements, processing requirements, cutting technical requirements, etc., to develop detailed solutions for customers, so as to make customers 100% satisfied. If you have any requirements and needs, please contact us in time.