s355 hot rolled automotive steel grade 10mm thick plate production

For the estimation in April and the second quarter, the estimation on March 16 is still valid, but the decrease in April is 10% higher than the neutral prediction. It is a conservative estimation based on 10% for the high probability event. In the second

For the estimation in April and the second quarter, the estimation on March 16 is still valid, but the decrease in April is 10% higher than the neutral prediction. It is a conservative estimation based on 10% for the high probability event. In the second quarter, the output of overseas pig iron will be reduced by 11.67 million tons, affecting the demand for s355 hot rolled automotive steel grade iron ore of about 1.84 million tons; in the first half of the year, the output will be reduced by 18.899 million tons, affecting the demand for iron ore of 32.13 million tons.

ASME SA537 pressure vessel uses heat-treated carbon-manganese-silicon steel plate.
The steel plates supplied by this standard are divided into three categories, namely SA537Gr1, SA537Gr2, and SA537Gr3. The maximum thickness of steel plates corresponding to these three grades is limited to: SA537Gr1 is not more than 100mm;
The thickness of SA537Gr2 does not exceed 150mm;
The thickness of SA537Gr3 does not exceed 150mm.

Facing the new situation and facing new goals, the company revolves around the sixteen-character development policy of “prioritizing production preservation, society-oriented, market operation, and brand creation and efficiency”. Layout the country in accordance with the modern logistics model, and accelerate the establishment of a modern integrated steel enterprise integrating steel storage, transportation, processing, and distribution.

According to the monitoring of the Iron and Steel Association, at the end of October, the China Steel Price Index (CSPI) was 107.34 points, an increase of 1.24 points or 1.17% from the end of last year; the price of CIOPI imported iron ore during the same period was US6.38/ton, an increase of US.86/ton from the previous month, an increase of 28.57%. The price increase of iron ore is significantly greater than that of steel, and the impact on the production costs of steel companies will gradually become apparent, greatly reducing corporate profitability.

Our products have perfect after-sales system to protect the interests of customers. At the same time, we can according to s355 hot rolled automotive steel grade customer's requirements, processing requirements, cutting technical requirements, etc., to develop detailed solutions for customers, so as to make customers 100% satisfied. If you have any requirements and needs, please contact us in time.